EPM1270T144C5N
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 144 |
| Weight | 1.319103g |
| Packaging | Bulk |
| Published | 2003 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 144 |
| Termination | SMD/SMT |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | 0°C |
| Additional Feature | IT CAN ALSO OPERATE AT 3.3V |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.5V |
| Frequency | 304MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 144 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | OTHER |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.375V |
| Memory Size | 1kB |
| Operating Supply Current | 55mA |
| Number of I/O | 116 |
| Nominal Supply Current | 110mA |
| Memory Type | FLASH |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 10 ns |
| Frequency (Max) | 304MHz |
| Number of Logic Elements/Cells | 1270 |
| Number of Logic Blocks (LABs) | 127 |
| Speed Grade | 5 |
| Output Function | MACROCELL |
| Number of Macro Cells | 980 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height | 1.4mm |
| Length | 20mm |
| Width | 20mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
EPM1270T144C5N Overview
980macrocells exist, which are cells in a mobile phone network that are primarily composed of high-power towers, antennas, or masts.You can find it in package [0].In this case, there are 116 I/Os programmed.It is programmed that device terminations will be 144 .As the terminal position of this electrical part is [0], it serves as an important access point for passengers and freight.There is 2.5V voltage supply for this device.There is a part in the family [0].The chip should be packaged by Bulk.There are 144 pins on the chip.It is also possible to find IT CAN ALSO OPERATE AT 3.3Vwhen using this device.For high efficiency, the supply voltage should be maintained at [0].It is recommended to store data in [0].Surface Mountis the mounting point of this electronic part.It is designed with 144 pins.It operates with the maximal supply voltage of 3.6V.A minimum supply voltage of 2.375V is required for it to operate.A frequency of 304MHzcan be achieved.It is recommended that the operating temperature exceeds 0°C.A temperature lower than 85°Cis recommended for operation.The logic block consists of 127 l logic blocks (LABs).A fundamental building block of logic consists of 1270logic elements/cells.The maximal frequency should be lower than 304MHz.Using the devices' 1kBmemory, programs and data can be stored.
EPM1270T144C5N Features
TQFP package
116 I/Os
144 pin count
144 pins
127 logic blocks (LABs)
EPM1270T144C5N Applications
There are a lot of Altera EPM1270T144C5N CPLDs applications.
- USB Bus
- PULSE WIDTH MODULATION (PWM)
- Complex programmable logic devices
- I/O PORTS (MCU MODULE)
- ROM patching
- PLC analog input modules
- INTERRUPT SYSTEM
- POWER-SAVING MODES
- Digital multiplexers
- Voltage level translation
