EPM1270T144I5
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 144 |
| Packaging | Bulk |
| Published | 2003 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 144 |
| ECCN Code | 3A991 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 100°C |
| Min Operating Temperature | -40°C |
| Additional Feature | IT CAN ALSO OPERATE AT 3.3V |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 220 |
| Supply Voltage | 2.5V |
| Frequency | 1.8797GHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 144 |
| Operating Supply Voltage | 3.3V |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.375V |
| Memory Size | 1kB |
| Operating Supply Current | 55mA |
| Number of I/O | 116 |
| Nominal Supply Current | 55mA |
| Memory Type | FLASH |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 10 ns |
| Frequency (Max) | 304MHz |
| Number of Logic Elements/Cells | 1270 |
| Number of Programmable I/O | 116 |
| Number of Logic Blocks (LABs) | 127 |
| Speed Grade | 5 |
| Output Function | MACROCELL |
| Number of Macro Cells | 980 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 20mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
EPM1270T144I5 Overview
A mobile phone network consists of 980macro cells, which are radio coverage cells served by a high-power cell site (tower, antenna or mast).A TQFP package contains the item.In this case, there are 116 I/Os programmed.The termination of a device is set to [0].The terminal position of this electrical component is QUAD.It is powered from a supply voltage of 2.5V.There is a part in the family [0].It is recommended to package the chip by Bulk.With 144pins programmed, the chip is ready to use.The device can also be used to find [0].In order to maintain high efficiency, the supply voltage should be maintained at [0].For storing data, it is recommended to use [0].Surface Mountis the mounting point of this electronic part.A total of 144pins are provided on this board.A maximum voltage of 3.6Vis required for operation.The minimal supply voltage is 2.375V.Currently, there are 116 Programmable I/Os available.This can be achieved at a frequency of 1.8797GHz.It is recommended that the operating temperature exceeds -40°C.It is recommended to keep the operating temperature below 100°C.In total, it contains 127 logic blocks (LABs).A fundamental building block consists of 1270logic elements/cells.It is recommended that the maximum frequency is less than 0.The devices embed a memory of 1kB available for storing programs and datas.
EPM1270T144I5 Features
TQFP package
116 I/Os
144 pin count
144 pins
127 logic blocks (LABs)
EPM1270T144I5 Applications
There are a lot of Altera EPM1270T144I5 CPLDs applications.
- Power Meter SMPS
- Address decoding
- Discrete logic functions
- DDC INTERFACE
- Complex programmable logic devices
- INTERRUPT SYSTEM
- Battery operated portable devices
- Auxiliary Power Supply Isolated and Non-isolated
- PULSE WIDTH MODULATION (PWM)
- Address decoders
