EPM2210F256A5N
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | FBGA |
| Number of Pins | 256 |
| Published | 2003 |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 256 |
| ECCN Code | 3A991 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Additional Feature | IT CAN ALSO OPERATE AT 3.3V |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 1mm |
| Frequency | 1.8797GHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 256 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | AUTOMOTIVE |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.375V |
| Memory Size | 1kB |
| Operating Supply Current | 55mA |
| Number of I/O | 204 |
| Nominal Supply Current | 55mA |
| Memory Type | FLASH |
| Propagation Delay | 11.2 ns |
| Turn On Delay Time | 11.2 ns |
| Frequency (Max) | 304MHz |
| Number of Logic Elements/Cells | 2210 |
| Number of Programmable I/O | 204 |
| Number of Logic Blocks (LABs) | 221 |
| Output Function | MACROCELL |
| Number of Macro Cells | 1700 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 2.2mm |
| Length | 17mm |
| Width | 17mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
EPM2210F256A5N Overview
A mobile phone network consists of 1700macro cells, which are radio coverage cells served by a high-power cell site (tower, antenna or mast).It is part of the FBGA package.The device is programmed with 204 I/Os.Devices are programmed with terminations of [0].This electrical part is wired with a terminal position of BOTTOM.Power is supplied by a voltage of 2.5V volts.There is a part in the family [0].There are 256 pins on the chip.If you use this device, you will also find [0].A high level of efficiency can be achieved by maintaining the supply voltage at [0].For data storage, FLASHis adopted.Surface Mountis used to mount this electronic component.The device is designed with pins [0].It operates at a maximum supply voltage of 3.6V volts.Despite its minimal supply voltage of [0], it is capable of operating.A programmable I/O count of 204 has been recorded.It is possible to achieve a frequency of 1.8797GHz.It is recommended that the operating temperature be greater than -40°C.It is recommended to keep the operating temperature below 125°C.It is composed of 221 logic blocks (LABs).As a fundamental building block, there are 2210 logic elements/cells.There should be a lower maximum frequency than 304MHz.These devices are capable of storing programs and data in 1kBmemory.
EPM2210F256A5N Features
FBGA package
204 I/Os
256 pin count
256 pins
221 logic blocks (LABs)
EPM2210F256A5N Applications
There are a lot of Altera EPM2210F256A5N CPLDs applications.
- Pattern recognition
- Power up sequencing
- Dedicated input registers
- Voltage level translation
- I/O expansion
- SUPERVISORY FUNCTION (LVD AND WATCHDOG)
- State machine design
- Custom state machines
- I2C BUS INTERFACE
- State machine control
