EPM2210F256A5N
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 256-BGA |
| Surface Mount | YES |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tray |
| Series | MAX® II |
| JESD-609 Code | e1 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 256 |
| ECCN Code | 3A991 |
| Terminal Finish | TIN SILVER COPPER |
| Additional Feature | IT CAN ALSO OPERATE AT 3.3V |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 1mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | EPM2210 |
| JESD-30 Code | S-PBGA-B256 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 2.625V |
| Power Supplies | 1.5/3.32.5/3.3V |
| Supply Voltage-Min (Vsup) | 2.375V |
| Programmable Type | In System Programmable |
| Number of I/O | 204 |
| Propagation Delay | 11.2 ns |
| Output Function | MACROCELL |
| Number of Macro Cells | 1700 |
| JTAG BST | YES |
| Voltage Supply - Internal | 2.5V 3.3V |
| Delay Time tpd(1) Max | 7ns |
| Number of Logic Elements/Blocks | 2210 |
| Height Seated (Max) | 2.2mm |
| Length | 17mm |
| Width | 17mm |
| RoHS Status | RoHS Compliant |
EPM2210F256A5N Overview
This network has 1700macro cells, which are cells that provide radio coverage provided by a high-power cell site (tower, antenna, mast).It is part of the 256-BGA package.It is equipped with 204I/O ports.The device is programmed with 256 terminations.There is a BOTTOMterminal position on the electrical part in question.Power is supplied by a voltage of 2.5V volts.It is included in Programmable Logic Devices.It is packaged in the way of Tray.To ensure its reliability, the operating temperature is set to [0].It is recommended that Surface Mountholds the chip in place.The FPGA belongs to the MAX? II series.If this device is used, you will also be able to find [0].Its related parts can be found in the [0].2210logic blocks/elements are present.In order for the device to operate, it requires 1.5/3.32.5/3.3V power supplies.Supply voltage (Vsup) reaches a maximum of 2.625V.Vsup (supply voltage) must be greater than 2.375V.
EPM2210F256A5N Features
256-BGA package
204 I/Os
The operating temperature of -40°C~125°C TJ
1.5/3.32.5/3.3V power supplies
EPM2210F256A5N Applications
There are a lot of Intel EPM2210F256A5N CPLDs applications.
- DDC INTERFACE
- Parity generators
- White goods (Washing, Cold, Aircon ,...)
- Auxiliary Power Supply Isolated and Non-isolated
- STANDARD SERIAL INTERFACE UART
- ToR/Aggregation/Core Switch and Router
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
- Wireless Infrastructure Base Band Unit and Remote Radio Unit
- Multiple Clock Source Selection
- I/O PORTS (MCU MODULE)
