EPM2210F256C3
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | FBGA |
| Number of Pins | 256 |
| Packaging | Bulk |
| Published | 2003 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 256 |
| ECCN Code | 3A991 |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | 0°C |
| Additional Feature | IT CAN ALSO OPERATE AT 3.3V |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 220 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 1mm |
| Frequency | 3.01205GHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 256 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL EXTENDED |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.375V |
| Memory Size | 1kB |
| Operating Supply Current | 55mA |
| Number of I/O | 204 |
| Nominal Supply Current | 55mA |
| Memory Type | FLASH |
| Propagation Delay | 7 ns |
| Turn On Delay Time | 7 ns |
| Frequency (Max) | 304MHz |
| Number of Logic Elements/Cells | 2210 |
| Number of Programmable I/O | 204 |
| Number of Logic Blocks (LABs) | 221 |
| Output Function | MACROCELL |
| Number of Macro Cells | 1700 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 2.2mm |
| Length | 17mm |
| Width | 17mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
EPM2210F256C3 Overview
1700 macrocells are present in the mobile phone network, which offer radio coverage from a high-power cell tower, antenna, or mast.You can find it in package [0].The device is programmed with 204 I/O ports.Devices are programmed with terminations of [0].As the terminal position of this electrical part is [0], it serves as an important access point for passengers and freight.Power is supplied by a voltage of 2.5V volts.It is a part of the family [0].Package the chip by Bulk.The chip is programmed with 256 pins.This device is also capable of displaying [0].The supply voltage should be maintained at 3.3V for high efficiency.Data is stored using [0].A Surface Mountis mounted on this electronic component.This board has 256 pins.There is a maximum supply voltage of 3.6V.It is powered by 2.375Vas its minimum supply voltage.A total of 204 Programmable I/Os are available.You can achieve 3.01205GHzfrequencies.There should be a temperature above 0°Cat the time of operation.Temperatures should not exceed 85°C.The logic block consists of 221 l logic blocks (LABs).Fundamental building blocks consist of 2210logic elements/cells.It is recommended that the maximum frequency be less than 304MHz.It is possible to store data and programs in the devices' 1kBmemory.
EPM2210F256C3 Features
FBGA package
204 I/Os
256 pin count
256 pins
221 logic blocks (LABs)
EPM2210F256C3 Applications
There are a lot of Altera EPM2210F256C3 CPLDs applications.
- Reset swapping
- Power Meter SMPS
- Multiple DIP Switch Replacement
- White goods (Washing, Cold, Aircon ,...)
- Power up sequencing
- Handheld digital devices
- Complex programmable logic devices
- DDC INTERFACE
- STANDARD SERIAL INTERFACE UART
- I/O PORTS (MCU MODULE)
