EPM2210F256C5
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | FBGA |
| Number of Pins | 256 |
| Packaging | Bulk |
| Published | 2003 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 256 |
| ECCN Code | 3A991 |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | 0°C |
| Additional Feature | IT CAN ALSO OPERATE AT 3.3V |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 220 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 1mm |
| Frequency | 1.8797GHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 256 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL EXTENDED |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.375V |
| Memory Size | 1kB |
| Operating Supply Current | 55mA |
| Number of I/O | 204 |
| Nominal Supply Current | 55mA |
| Memory Type | FLASH |
| Propagation Delay | 11.2 ns |
| Turn On Delay Time | 11.2 ns |
| Frequency (Max) | 304MHz |
| Number of Logic Elements/Cells | 2210 |
| Number of Programmable I/O | 204 |
| Number of Logic Blocks (LABs) | 221 |
| Output Function | MACROCELL |
| Number of Macro Cells | 1700 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 2.2mm |
| Length | 17mm |
| Width | 17mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
EPM2210F256C5 Overview
1700 macrocells are present in the mobile phone network, which offer radio coverage from a high-power cell tower, antenna, or mast.You can find it in package [0].It is programmed with 204 I/Os.It is programmed to terminate devices at [0].Its terminal position is BOTTOM.Power is supplied by a voltage of 2.5V volts.This part is part of the family [0].Ideally, the chip should be packaged by Bulk.The chip is programmed with 256 pins.When using this device, IT CAN ALSO OPERATE AT 3.3Vcan also be found.A high level of efficiency can be achieved by maintaining the supply voltage at [0].It is recommended to store data in [0].This electronic part is mounted in the way of Surface Mount.The device has a pinout of [0].A maximum voltage of 3.6Vis required for operation.Initially, it requires a voltage of 2.375Vas the minimum supply voltage.There are a total of 204 Programmable I/Os.There is a maximum frequency of 1.8797GHz.There should be a temperature above 0°Cat the time of operation.The operating temperature should be lower than 85°C.It is composed of 221 logic blocks (LABs).Basic building blocks have 2210logic elements.Maximum frequency should be less than 304MHz.The devices embed a memory of 1kB available for storing programs and datas.
EPM2210F256C5 Features
FBGA package
204 I/Os
256 pin count
256 pins
221 logic blocks (LABs)
EPM2210F256C5 Applications
There are a lot of Altera EPM2210F256C5 CPLDs applications.
- Programmable power management
- Protection relays
- I2C BUS INTERFACE
- Field programmable gate
- Interface bridging
- ROM patching
- Custom shift registers
- DDC INTERFACE
- Address decoding
- SUPERVISORY FUNCTION (LVD AND WATCHDOG)
