EPM2210F256C5N
| Parameters | |
|---|---|
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | FBGA |
| Number of Pins | 256 |
| Packaging | Bulk |
| Published | 2003 |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 256 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | 0°C |
| Additional Feature | IT CAN ALSO OPERATE AT 3.3V |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 1mm |
| Frequency | 304MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 256 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | OTHER |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.375V |
| Memory Size | 1kB |
| Operating Supply Current | 55mA |
| Number of I/O | 204 |
| Memory Type | FLASH |
| Propagation Delay | 11.2 ns |
| Turn On Delay Time | 11.2 ns |
| Frequency (Max) | 304MHz |
| Number of Logic Elements/Cells | 2210 |
| Number of Logic Blocks (LABs) | 221 |
| Output Function | MACROCELL |
| Number of Macro Cells | 1700 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height | 1.8mm |
| Length | 17mm |
| Width | 17mm |
EPM2210F256C5N Overview
1700 macrocells are present in the mobile phone network, which offer radio coverage from a high-power cell tower, antenna, or mast.It is contained in package [0].The device is programmed with 204 I/O ports.Terminations of devices are set to [0].The terminal position of this electrical component is BOTTOM.The power supply voltage is 2.5V.It is a part of the family [0].Bulkis the packaging method.There are 256 pins on the chip.It is also characterized by IT CAN ALSO OPERATE AT 3.3V.The supply voltage should be maintained at 3.3V for high efficiency.In order to store data, FLASHis used.It is mounted by Surface Mount.The pins are [0].This device operates at a voltage of 3.6V when the maximum supply voltage is applied.A minimum supply voltage of 2.375V is required for it to operate.There is 304MHz frequency that can be achieved.In order to operate properly, the operating temperature should be higher than 0°C.A temperature below 85°Cshould be used as the operating temperature.There are 221 logic blocks (LABs) in its basic building block.A fundamental building block consists of 2210logic elements/cells.The maximum frequency should not exceed 304MHz.It is possible to store data and programs in the devices' 1kBmemory.
EPM2210F256C5N Features
FBGA package
204 I/Os
256 pin count
256 pins
221 logic blocks (LABs)
EPM2210F256C5N Applications
There are a lot of Altera EPM2210F256C5N CPLDs applications.
- Programmable power management
- STANDARD SERIAL INTERFACE UART
- I/O PORTS (MCU MODULE)
- Synchronous or asynchronous mode
- ON-CHIP OSCILLATOR CIRCUIT
- DMA control
- Power up sequencing
- Cross-Matrix Switch
- LED Lighting systems
- Handheld digital devices
