EPM2210F256C5N
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 256-BGA |
| Surface Mount | YES |
| Operating Temperature | 0°C~85°C TJ |
| Packaging | Tray |
| Series | MAX® II |
| JESD-609 Code | e1 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 256 |
| Terminal Finish | TIN SILVER COPPER |
| Additional Feature | IT CAN ALSO OPERATE AT 3.3V |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 1mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | EPM2210 |
| JESD-30 Code | S-PBGA-B256 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 2.625V |
| Power Supplies | 1.5/3.32.5/3.3V |
| Supply Voltage-Min (Vsup) | 2.375V |
| Programmable Type | In System Programmable |
| Number of I/O | 204 |
| Propagation Delay | 11.2 ns |
| Output Function | MACROCELL |
| Number of Macro Cells | 1700 |
| JTAG BST | YES |
| Voltage Supply - Internal | 2.5V 3.3V |
| Delay Time tpd(1) Max | 7ns |
| Number of Logic Elements/Blocks | 2210 |
| Height Seated (Max) | 2.2mm |
| Length | 17mm |
| Width | 17mm |
| RoHS Status | RoHS Compliant |
EPM2210F256C5N Overview
A mobile phone network consists of 1700macro cells, which are radio coverage cells served by a high-power cell site (tower, antenna or mast).In the 256-BGApackage, you will find it.It is programmed with 204 I/Os.256terminations are programmed into the device.Its terminal position is BOTTOM.A voltage of 2.5V is used as the power supply for this device.It is a part of the family [0].Ideally, the chip should be packaged by Tray.During operation, the operating temperature is kept at 0°C~85°C TJ to ensure its reliability.There should be a Surface Mounton the chip.It is a type of FPGA belonging to the MAX? II series.Additionally, this device is capable of displaying [0].The EPM2210indicates that related parts can be found.In total, there are 2210 logic elements/blocks.A total of 1.5/3.32.5/3.3V power supplies are needed to run it.Initially, the maximum supply voltage (Vsup) is 2.625V.Voltage supply (Vsup) should be higher than 2.375V.
EPM2210F256C5N Features
256-BGA package
204 I/Os
The operating temperature of 0°C~85°C TJ
1.5/3.32.5/3.3V power supplies
EPM2210F256C5N Applications
There are a lot of Intel EPM2210F256C5N CPLDs applications.
- Storage Cards and Storage Racks
- Digital systems
- POWER-SAVING MODES
- Multiple Clock Source Selection
- Complex programmable logic devices
- Auxiliary Power Supply Isolated and Non-isolated
- Page register
- Software Configuration of Add-In Boards
- Address decoding
- Power automation
