EPM2210F256I5
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | FBGA |
| Number of Pins | 256 |
| Published | 2003 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 256 |
| ECCN Code | 3A991 |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Max Operating Temperature | 100°C |
| Min Operating Temperature | -40°C |
| Additional Feature | IT CAN ALSO OPERATE AT 3.3V |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 220 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 1mm |
| Frequency | 1.8797GHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 256 |
| Operating Supply Voltage | 3.3V |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.375V |
| Memory Size | 1kB |
| Operating Supply Current | 55mA |
| Number of I/O | 204 |
| Nominal Supply Current | 55mA |
| Memory Type | FLASH |
| Propagation Delay | 11.2 ns |
| Turn On Delay Time | 11.2 ns |
| Frequency (Max) | 304MHz |
| Number of Logic Elements/Cells | 2210 |
| Number of Programmable I/O | 204 |
| Number of Logic Blocks (LABs) | 221 |
| Output Function | MACROCELL |
| Number of Macro Cells | 1700 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 2.2mm |
| Length | 17mm |
| Width | 17mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
EPM2210F256I5 Overview
The mobile phone network has 1700 macro cells, which are cells that provide radio coverage from high-power cell sites (towers, antennas, or masts).There is a FBGA package containing it.It is programmed with 204 I/Os.There is a 256terminations set on devices.The terminal position of this electrical part is BOTTOM, which serves as an important access point for passengers or freight.The power source is powered by 2.5Vvolts.This part is in the family [0].A chip with 256pins is programmed.The device can also be used to find [0].If high efficiency is to be achieved, the supply voltage should be maintained at [0].In this case, FLASHwill be used to store the data.A Surface Mountis mounted on this electronic component.There are 256 pins on the device.A voltage of 3.6V is the maximum supply voltage for this device.The device is designed to operate with a minimal supply voltage of 2.375VV.A total of 204programmable I/Os are available.You can achieve 1.8797GHzfrequencies.In order to operate, the temperature should be higher than -40°C.It is recommended that the operating temperature be lower than 100°C.In its simplest form, it consists of 221 logic blocks (LABs).In order to form a fundamental building block, there are 2210logic elements/cells.It is recommended that the maximum frequency is less than 0.Devices include a memory of 1kBavailable for the storage of programs and data.
EPM2210F256I5 Features
FBGA package
204 I/Os
256 pin count
256 pins
221 logic blocks (LABs)
EPM2210F256I5 Applications
There are a lot of Altera EPM2210F256I5 CPLDs applications.
- Synchronous or asynchronous mode
- Storage Cards and Storage Racks
- Software Configuration of Add-In Boards
- ON-CHIP OSCILLATOR CIRCUIT
- STANDARD SERIAL INTERFACE UART
- Custom shift registers
- Protection relays
- Portable digital devices
- Wide Vin Industrial low power SMPS
- PULSE WIDTH MODULATION (PWM)
