EPM2210F324C3
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | FBGA |
| Number of Pins | 324 |
| Packaging | Bulk |
| Published | 2003 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 324 |
| ECCN Code | 3A991 |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | 0°C |
| Additional Feature | IT CAN ALSO OPERATE AT 3.3V |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 220 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 1mm |
| Frequency | 3.01205GHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 324 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL EXTENDED |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.375V |
| Memory Size | 1kB |
| Operating Supply Current | 55mA |
| Number of I/O | 272 |
| Nominal Supply Current | 55mA |
| Memory Type | FLASH |
| Propagation Delay | 7 ns |
| Frequency (Max) | 304MHz |
| Number of Logic Elements/Cells | 2210 |
| Number of Programmable I/O | 272 |
| Number of Logic Blocks (LABs) | 221 |
| Output Function | MACROCELL |
| Number of Macro Cells | 1700 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 2.2mm |
| Length | 19mm |
| Width | 19mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
EPM2210F324C3 Overview
There are 1700 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).There is a FBGA package containing it.As you can see, this device has 272 I/O ports programmed into it.There are 324 terminations programmed into the device.This electrical component has a terminal position of 0.An electrical supply voltage of 2.5V is used to power it.The part is included in Programmable Logic Devices.It is recommended that the chip be packaged by Bulk.The chip is programmed with 324 pins.If this device is used, you will also be able to find [0].The supply voltage should be maintained at 3.3V for high efficiency.In general, it is recommended to store data in [0].Surface Mountis used to mount this electronic component.The device has a pinout of [0].A voltage of 3.6V is the maximum supply voltage for this device.Despite its minimal supply voltage of [0], it is capable of operating.There are 272 Programmable I/Os.You can achieve 3.01205GHzfrequencies.In order to operate properly, the operating temperature should be higher than 0°C.Temperatures should not exceed 85°C.The program consists of 221 logic blocks (LABs).The fundamental building block consists of 2210logic elements/cells.It is recommended that the maximum frequency is less than 0.It is possible to store data and programs in the devices' 1kBmemory.
EPM2210F324C3 Features
FBGA package
272 I/Os
324 pin count
324 pins
221 logic blocks (LABs)
EPM2210F324C3 Applications
There are a lot of Altera EPM2210F324C3 CPLDs applications.
- State machine control
- TIMERS/COUNTERS
- Storage Cards and Storage Racks
- Timing control
- Software Configuration of Add-In Boards
- PLC analog input modules
- DMA control
- Programmable polarity
- Address decoders
- Discrete logic functions
