EPM2210F324C4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | FBGA |
| Number of Pins | 324 |
| Packaging | Bulk |
| Published | 2003 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 324 |
| ECCN Code | 3A991 |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | 0°C |
| Additional Feature | IT CAN ALSO OPERATE AT 3.3V |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 220 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 1mm |
| Frequency | 2.3148GHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 324 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL EXTENDED |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.375V |
| Memory Size | 1kB |
| Operating Supply Current | 55mA |
| Number of I/O | 272 |
| Nominal Supply Current | 55mA |
| Memory Type | FLASH |
| Propagation Delay | 9.1 ns |
| Frequency (Max) | 304MHz |
| Number of Logic Elements/Cells | 2210 |
| Number of Programmable I/O | 272 |
| Number of Logic Blocks (LABs) | 221 |
| Output Function | MACROCELL |
| Number of Macro Cells | 1700 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 2.2mm |
| Length | 19mm |
| Width | 19mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
EPM2210F324C4 Overview
There are 1700 macro cells, which are cells in a mobile phone network that provides radio coverage served by a high-power cell site (tower, antenna or mast).FBGAis the package in which it resides.As a result, it has 272 I/O ports programmed.324terminations have been programmed into the device.This electrical component has a terminal position of 0.It is powered by a voltage of 2.5V volts.There is a part in the family [0].As a result, it is packaged as Bulk.324pins are programmed on the chip.If this device is used, you will also be able to find [0].In order to achieve high efficiency, the supply voltage should be maintained at [0].In this case, FLASHwill be used to store the data.Surface Mountmounts this electronic component.The pins are [0].A voltage of 3.6V is the maximum supply voltage for this device.In order for it to operate, a supply voltage of 2.375Vis required.A total of 272 Programmable I/Os are available.You can achieve 2.3148GHzfrequencies.There should be a temperature above 0°Cat the time of operation.A temperature below 85°Cshould be used as the operating temperature.It is composed of 221 logic blocks (LABs).An elementary building block consists of 2210logic elements/cells.It should be below 304MHzat the maximal frequency.Devices contain a 1kBmemory for storing data and programs.
EPM2210F324C4 Features
FBGA package
272 I/Os
324 pin count
324 pins
221 logic blocks (LABs)
EPM2210F324C4 Applications
There are a lot of Altera EPM2210F324C4 CPLDs applications.
- Software Configuration of Add-In Boards
- ON-CHIP OSCILLATOR CIRCUIT
- ROM patching
- Address decoders
- INTERRUPT SYSTEM
- Power automation
- Programmable polarity
- PLC analog input modules
- Page register
- Wireless Infrastructure Base Band Unit and Remote Radio Unit
