EPM2210F324C5N
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | FBGA |
| Number of Pins | 324 |
| Published | 2003 |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 324 |
| Terminal Finish | Tin/Silver/Copper (Sn96.5Ag3.0Cu0.5) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | 0°C |
| Additional Feature | IT CAN ALSO OPERATE AT 3.3V |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 1mm |
| Frequency | 304MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 324 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | OTHER |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.375V |
| Memory Size | 1kB |
| Operating Supply Current | 55mA |
| Number of I/O | 272 |
| Memory Type | FLASH |
| Propagation Delay | 11.2 ns |
| Turn On Delay Time | 11.2 ns |
| Frequency (Max) | 304MHz |
| Number of Logic Elements/Cells | 2210 |
| Number of Logic Blocks (LABs) | 221 |
| Output Function | MACROCELL |
| Number of Macro Cells | 1700 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height | 1.8mm |
| Length | 19mm |
| Width | 19mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
EPM2210F324C5N Overview
There are 1700 macro cells in the network, which are high-power cell sites that provide radio coverage (tower, antenna, or mast) for a mobile phone network.It is part of the FBGA package.As you can see, this device has 272 I/O ports programmed into it.The termination of a device is set to [0].The terminal position of this electrical component is BOTTOM.A voltage of 2.5V is used as the power supply for this device.It is a part of the family [0].324pins are programmed on the chip.If you use this device, you will also find [0].If high efficiency is to be achieved, the supply voltage should be maintained at [0].For data storage, FLASHis adopted.Surface Mountis the mounting point of this electronic part.A total of 324pins are provided on this board.This device operates at a voltage of 3.6V when the maximum supply voltage is applied.The minimal supply voltage is 2.375V.A frequency of 304MHzcan be achieved.The operating temperature should be higher than 0°C.Ideally, the operating temperature should be below 85°C.The system consists of 221 logic blocks (LABs).Basic building blocks have 2210logic elements.The maximum frequency should not exceed 304MHz.The devices contain a memory of 1kBthat can be used to store programs and data.
EPM2210F324C5N Features
FBGA package
272 I/Os
324 pin count
324 pins
221 logic blocks (LABs)
EPM2210F324C5N Applications
There are a lot of Altera EPM2210F324C5N CPLDs applications.
- Battery operated portable devices
- Software Configuration of Add-In Boards
- DDC INTERFACE
- Configurable Addressing of I/O Boards
- DMA control
- Discrete logic functions
- Address decoders
- White goods (Washing, Cold, Aircon ,...)
- Auxiliary Power Supply Isolated and Non-isolated
- Digital designs
