EPM2210GF256C3
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | FBGA |
| Number of Pins | 256 |
| Packaging | Bulk |
| Published | 2003 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 256 |
| ECCN Code | 3A991 |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | 0°C |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 220 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 1mm |
| Reach Compliance Code | not_compliant |
| Frequency | 3.01205GHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 256 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.8V |
| Temperature Grade | COMMERCIAL EXTENDED |
| Max Supply Voltage | 1.89V |
| Min Supply Voltage | 1.71V |
| Memory Size | 1kB |
| Operating Supply Current | 40mA |
| Number of I/O | 204 |
| Nominal Supply Current | 40mA |
| Memory Type | FLASH |
| Propagation Delay | 7 ns |
| Turn On Delay Time | 7 ns |
| Frequency (Max) | 304MHz |
| Number of Logic Elements/Cells | 2210 |
| Number of Programmable I/O | 204 |
| Number of Logic Blocks (LABs) | 221 |
| Output Function | MACROCELL |
| Number of Macro Cells | 1700 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 2.2mm |
| Length | 17mm |
| Width | 17mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
EPM2210GF256C3 Overview
The mobile phone network has 1700 macro cells, which are cells that provide radio coverage from high-power cell sites (towers, antennas, or masts).It is contained in package [0].The device is programmed with 204 I/O ports.It is programmed to terminate devices at [0].The terminal position of this electrical component is BOTTOM.There is 1.8V voltage supply for this device.It is a part of the family [0].It is recommended that the chip be packaged by Bulk.It is programmed with 256 pins.When using this device, YESis also available.If high efficiency is to be achieved, the supply voltage should be maintained at [0].Data storage is performed using [0].It is mounted by Surface Mount.There are 256 pins on the device.This device operates at a voltage of 1.89Vas its maximum supply voltage.It is powered by 1.71Vas its minimum supply voltage.A total of 204programmable I/Os are available.This frequency can be achieved at 3.01205GHz.Ideally, the operating temperature should be greater than 0°C.Temperatures should not exceed 85°C.The system consists of 221 logic blocks (LABs).There are 2210 logic elements/cells to form a fundamental building block. If the maximal frequency is less than [0], it should be lower than that.The devices contain a memory of 1kBthat can be used to store programs and data.
EPM2210GF256C3 Features
FBGA package
204 I/Os
256 pin count
256 pins
221 logic blocks (LABs)
EPM2210GF256C3 Applications
There are a lot of Altera EPM2210GF256C3 CPLDs applications.
- State machine design
- Page register
- I2C BUS INTERFACE
- Portable digital devices
- USB Bus
- Synchronous or asynchronous mode
- ROM patching
- Code converters
- Bootloaders for FPGAs
- White goods (Washing, Cold, Aircon ,...)
