EPM2210GF256C5
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | FBGA |
| Number of Pins | 256 |
| Packaging | Bulk |
| Published | 2003 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 256 |
| ECCN Code | 3A991 |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | 0°C |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 220 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 1mm |
| Frequency | 1.8797GHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 256 |
| Operating Supply Voltage | 1.8V |
| Temperature Grade | COMMERCIAL EXTENDED |
| Max Supply Voltage | 1.89V |
| Min Supply Voltage | 1.71V |
| Memory Size | 1kB |
| Operating Supply Current | 40mA |
| Number of I/O | 204 |
| Nominal Supply Current | 40mA |
| Memory Type | FLASH |
| Propagation Delay | 11.2 ns |
| Turn On Delay Time | 11.2 ns |
| Frequency (Max) | 304MHz |
| Number of Logic Elements/Cells | 2210 |
| Number of Programmable I/O | 204 |
| Number of Logic Blocks (LABs) | 221 |
| Output Function | MACROCELL |
| Number of Macro Cells | 1700 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 2.2mm |
| Length | 17mm |
| Width | 17mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
EPM2210GF256C5 Overview
1700 macrocells are present in the mobile phone network, which offer radio coverage from a high-power cell tower, antenna, or mast.The product is contained in a FBGA package.As you can see, this device has 204 I/O ports programmed into it.256terminations have been programmed into the device.This electrical component has a terminal position of 0.It is powered by a voltage of 1.8V volts.The part belongs to Programmable Logic Devices family.Ideally, the chip should be packaged by Bulk.It is programmed with 256 pins.Additionally, this device is capable of displaying [0].For high efficiency, the supply voltage should be maintained at [0].In order to store data, FLASHis used.In this case, it is mounted by Surface Mount.This board has 256 pins.A voltage of 1.89V is the maximum supply voltage for this device.A minimum supply voltage of 1.71V is required for this device to operate.There are 204 Programmable I/Os.This frequency can be achieved at 1.8797GHz.Operating temperatures should be higher than 0°C.A temperature lower than 85°Cis recommended for operation.There are 221 logic blocks (LABs) in its basic building block.As a fundamental building block, there are 2210 logic elements/cells.It is recommended that the maximum frequency is less than 0.Using the devices' 1kBmemory, programs and data can be stored.
EPM2210GF256C5 Features
FBGA package
204 I/Os
256 pin count
256 pins
221 logic blocks (LABs)
EPM2210GF256C5 Applications
There are a lot of Altera EPM2210GF256C5 CPLDs applications.
- D/T registers and latches
- I/O PORTS (MCU MODULE)
- Complex programmable logic devices
- Software Configuration of Add-In Boards
- ANALOG-TO-DIGITAL CONVERTOR (ADC)
- Timing control
- Cross-Matrix Switch
- PLC analog input modules
- Interface bridging
- Power Meter SMPS
