EPM2210GF256C5N
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | FBGA |
| Number of Pins | 256 |
| Packaging | Bulk |
| Published | 2003 |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 256 |
| ECCN Code | 3A991 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | 0°C |
| Additional Feature | IT CAN ALSO OPERATE AT 3.3V |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 1mm |
| Frequency | 201.1MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 256 |
| Operating Supply Voltage | 1.8V |
| Temperature Grade | OTHER |
| Max Supply Voltage | 1.89V |
| Min Supply Voltage | 1.71V |
| Memory Size | 1kB |
| Operating Supply Current | 40mA |
| Number of I/O | 204 |
| Memory Type | FLASH |
| Propagation Delay | 11.2 ns |
| Turn On Delay Time | 11.2 ns |
| Frequency (Max) | 304MHz |
| Number of Logic Elements/Cells | 2210 |
| Number of Logic Blocks (LABs) | 221 |
| Speed Grade | 5 |
| Output Function | MACROCELL |
| Number of Macro Cells | 1700 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height | 1.8mm |
| Length | 17mm |
| Width | 17mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
EPM2210GF256C5N Overview
There are 1700 macro cells in the network, which are high-power cell sites that provide radio coverage (tower, antenna, or mast) for a mobile phone network.It is contained in package [0].As a result, it has 204 I/O ports programmed.There are 256 terminations programmed into the device.There is a BOTTOMterminal position on the electrical part in question.The power source is powered by 1.8Vvolts.There is a part in the family [0].Bulkshould be used for packaging the chip.Chips are programmed with 256 pins.This device can also display [0].For high efficiency, the supply voltage should be maintained at [0].For data storage, FLASHis adopted.A Surface Mountis mounted on this electronic component.There are 256 pins on the device.This device operates at a voltage of 1.89Vas its maximum supply voltage.Initially, it requires a voltage of 1.71Vas the minimum supply voltage.There is 201.1MHz frequency that can be achieved.It is recommended that the operating temperature be higher than 0°C.It is recommended to keep the operating temperature below 85°C.The system consists of 221 logic blocks (LABs).The fundamental building block consists of 2210logic elements/cells.It is recommended that the maximum frequency is less than 0.The devices contain a memory of 1kBfor storing programs and data.
EPM2210GF256C5N Features
FBGA package
204 I/Os
256 pin count
256 pins
221 logic blocks (LABs)
EPM2210GF256C5N Applications
There are a lot of Altera EPM2210GF256C5N CPLDs applications.
- STANDARD SERIAL INTERFACE UART
- USB Bus
- Pattern recognition
- White goods (Washing, Cold, Aircon ,...)
- PULSE WIDTH MODULATION (PWM)
- POWER-SAVING MODES
- Custom state machines
- Storage Cards and Storage Racks
- Auxiliary Power Supply Isolated and Non-isolated
- PLC analog input modules
