EPM2210GF324C5N
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | FBGA |
| Number of Pins | 324 |
| Packaging | Bulk |
| Published | 2003 |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 324 |
| ECCN Code | 3A991 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | 0°C |
| Additional Feature | IT CAN ALSO OPERATE AT 3.3V |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 1mm |
| Frequency | 1.8797GHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 324 |
| Operating Supply Voltage | 1.8V |
| Temperature Grade | OTHER |
| Max Supply Voltage | 1.89V |
| Min Supply Voltage | 1.71V |
| Memory Size | 1kB |
| Operating Supply Current | 40mA |
| Number of I/O | 272 |
| Nominal Supply Current | 40mA |
| Memory Type | FLASH |
| Propagation Delay | 11.2 ns |
| Turn On Delay Time | 11.2 ns |
| Frequency (Max) | 304MHz |
| Number of Logic Elements/Cells | 2210 |
| Number of Programmable I/O | 272 |
| Number of Logic Blocks (LABs) | 221 |
| Output Function | MACROCELL |
| Number of Macro Cells | 1700 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 2.2mm |
| Length | 19mm |
| Width | 19mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
EPM2210GF324C5N Overview
There are 1700 macro cells, which provide radio coverage via high-power cell towers, antennas or masts in a mobile phone network.A FBGA package contains the item.The device has 272inputs and outputs.There is a 324terminations set on devices.This electrical part has a terminal position of BOTTOMand is connected to the ground.The device is powered by a voltage of 1.8V volts.This part is included in Programmable Logic Devices.It is recommended to package the chip by Bulk.In this chip, the 324pins are programmed.Additionally, this device is capable of displaying [0].High efficiency requires a voltage supply of [0].For storing data, it is recommended to use [0].Surface Mountis the mounting point of this electronic part.This board has 324 pins.There is a maximum supply voltage of 1.89V.The device is designed to operate with a minimal supply voltage of 1.71VV.In total, there are 272programmable I/Os.In this case, 1.8797GHzis the frequency that can be achieved.In order to operate, the temperature should be higher than 0°C.It is recommended that the operating temperature be below 85°C.The program consists of 221 logic blocks (LABs).An elementary building block consists of 2210logic elements/cells.It is recommended that the maximum frequency is less than 0.Devices are equipped with a memory capacity of 1kBfor storing programs and data.
EPM2210GF324C5N Features
FBGA package
272 I/Os
324 pin count
324 pins
221 logic blocks (LABs)
EPM2210GF324C5N Applications
There are a lot of Altera EPM2210GF324C5N CPLDs applications.
- Random logic replacement
- Code converters
- DMA control
- Synchronous or asynchronous mode
- Wide Vin Industrial low power SMPS
- Voltage level translation
- Wireless Infrastructure Base Band Unit and Remote Radio Unit
- Digital systems
- USB Bus
- Pattern recognition
