Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Package / Case |
FBGA |
Number of Pins |
100 |
Published |
2003 |
JESD-609 Code |
e1 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
3 |
Number of Terminations |
100 |
ECCN Code |
EAR99 |
Terminal Finish |
Tin/Silver/Copper (Sn/Ag/Cu) |
Max Operating Temperature |
85°C |
Min Operating Temperature |
0°C |
Additional Feature |
IT CAN ALSO OPERATE AT 3.3V |
Subcategory |
Programmable Logic Devices |
Technology |
CMOS |
Terminal Position |
BOTTOM |
Terminal Form |
BALL |
Peak Reflow Temperature (Cel) |
260 |
Supply Voltage |
2.5V |
Terminal Pitch |
1mm |
Frequency |
2.3148GHz |
Time@Peak Reflow Temperature-Max (s) |
40 |
Pin Count |
100 |
Operating Supply Voltage |
3.3V |
Temperature Grade |
OTHER |
Max Supply Voltage |
3.6V |
Min Supply Voltage |
2.375V |
Memory Size |
1kB |
Operating Supply Current |
55mA |
Number of I/O |
80 |
Nominal Supply Current |
55mA |
Memory Type |
FLASH |
Propagation Delay |
6.1 ns |
Turn On Delay Time |
6.1 ns |
Frequency (Max) |
304MHz |
Number of Logic Elements/Cells |
240 |
Number of Programmable I/O |
80 |
Number of Logic Blocks (LABs) |
24 |
Speed Grade |
4 |
Output Function |
MACROCELL |
Number of Macro Cells |
192 |
JTAG BST |
YES |
In-System Programmable |
YES |
Height Seated (Max) |
1.7mm |
Length |
11mm |
Width |
11mm |
Radiation Hardening |
No |
RoHS Status |
RoHS Compliant |
Lead Free |
Lead Free |
EPM240F100C4N Overview
This network has 192macro cells, which are cells that provide radio coverage provided by a high-power cell site (tower, antenna, mast).The product is contained in a FBGA package.The device has 80inputs and outputs.100terminations have been programmed into the device.BOTTOMis the terminal position of this electrical part.There is 2.5V voltage supply for this device.The part is included in Programmable Logic Devices.It is programmed with 100 pins.It is also characterized by IT CAN ALSO OPERATE AT 3.3V.In order to maintain high efficiency, the supply voltage should be maintained at [0].In order to store data, FLASHis used.The electronic part is mounted by Surface Mount.100pins are included in its design.In this case, the maximum supply voltage is 3.6V.In order for it to operate, a supply voltage of 2.375Vis required.A programmable I/O count of 80 has been recorded.In this case, 2.3148GHzis the frequency that can be achieved.The operating temperature should be higher than 0°C.There should be a temperature below 85°Cat the time of operation.There are 24 logic blocks (LABs) in its basic building block.There are 240 logic elements/cells to form a fundamental building block. It is recommended that the maximum frequency is less than 0.Using the devices' 1kBmemory, programs and data can be stored.
EPM240F100C4N Features
FBGA package
80 I/Os
100 pin count
100 pins
24 logic blocks (LABs)
EPM240F100C4N Applications
There are a lot of Altera EPM240F100C4N CPLDs applications.
- Wide Vin Industrial low power SMPS
- Battery operated portable devices
- Random logic replacement
- I2C BUS INTERFACE
- Page register
- ROM patching
- DDC INTERFACE
- Auxiliary Power Supply Isolated and Non-isolated
- INTERRUPT SYSTEM
- Configurable Addressing of I/O Boards