EPM240F100C5N
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 100-LBGA |
| Surface Mount | YES |
| Operating Temperature | 0°C~85°C TJ |
| Packaging | Tray |
| Published | 2003 |
| Series | MAX® II |
| JESD-609 Code | e1 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Additional Feature | IT CAN ALSO OPERATE AT 3.3V |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 1mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | EPM240 |
| JESD-30 Code | S-PBGA-B100 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 2.625V |
| Power Supplies | 1.5/3.32.5/3.3V |
| Supply Voltage-Min (Vsup) | 2.375V |
| Programmable Type | In System Programmable |
| Number of I/O | 80 |
| Propagation Delay | 7.5 ns |
| Output Function | MACROCELL |
| Number of Macro Cells | 192 |
| JTAG BST | YES |
| Voltage Supply - Internal | 2.5V 3.3V |
| Delay Time tpd(1) Max | 4.7ns |
| Number of Logic Elements/Blocks | 240 |
| Height Seated (Max) | 1.7mm |
| Length | 11mm |
| Width | 11mm |
| RoHS Status | RoHS Compliant |
EPM240F100C5N Overview
A mobile phone network consists of 192macro cells, which are radio coverage cells served by a high-power cell site (tower, antenna or mast).It is embedded in the 100-LBGA package.As a result, it has 80 I/O ports programmed.It is programmed that device terminations will be 100 .This electrical part has a terminal position of BOTTOMand is connected to the ground.The power source is powered by 2.5Vvolts.It is a part of family [0].As a result, it is packaged as Tray.The temperature at which it operates is set to 0°C~85°C TJin order to ensure its reliability.It is recommended to mount the chip by Surface Mount.The FPGA belongs to the MAX? II series.If this device is used, you will also be able to find [0].The EPM240indicates that related parts can be found.There are 240 logic elements/blocks.This device runs on 1.5/3.32.5/3.3Vvolts of electricity.Vsup reaches 2.625Vas the maximum supply voltage.In order to operate properly, the supply voltage (Vsup) should be greater than 2.375V.
EPM240F100C5N Features
100-LBGA package
80 I/Os
The operating temperature of 0°C~85°C TJ
1.5/3.32.5/3.3V power supplies
EPM240F100C5N Applications
There are a lot of Intel EPM240F100C5N CPLDs applications.
- POWER-SAVING MODES
- Field programmable gate
- Multiple DIP Switch Replacement
- Portable digital devices
- Code converters
- Interface bridging
- ROM patching
- PLC analog input modules
- Programmable polarity
- Digital multiplexers
