EPM240F100I5N
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | FBGA |
| Number of Pins | 100 |
| Published | 2003 |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Max Operating Temperature | 100°C |
| Min Operating Temperature | -40°C |
| Additional Feature | IT CAN ALSO OPERATE AT 3.3V |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 1mm |
| Frequency | 1.8797GHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 100 |
| Operating Supply Voltage | 3.3V |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.375V |
| Memory Size | 1kB |
| Operating Supply Current | 55mA |
| Number of I/O | 80 |
| Nominal Supply Current | 55mA |
| Memory Type | FLASH |
| Propagation Delay | 7.5 ns |
| Turn On Delay Time | 7.5 ns |
| Frequency (Max) | 304MHz |
| Number of Logic Elements/Cells | 240 |
| Number of Programmable I/O | 80 |
| Number of Logic Blocks (LABs) | 24 |
| Speed Grade | 5 |
| Output Function | MACROCELL |
| Number of Macro Cells | 192 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 1.7mm |
| Length | 11mm |
| Width | 11mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
EPM240F100I5N Overview
This network has 192macro cells, which are cells that provide radio coverage provided by a high-power cell site (tower, antenna, mast).There is a FBGA package containing it.In this case, there are 80 I/Os programmed.There is a 100terminations set on devices.The terminal position of this electrical part is BOTTOM, which serves as an important access point for passengers or freight.A voltage of 2.5Vprovides power to the device.There is a part included in Programmable Logic Devices.The chip is programmed with 100 pins.This device can also display [0].It is recommended that the supply voltage be kept at 3.3Vto maximize efficiency.It is adopted to store data in [0].In this case, Surface Mountis used to mount the electronic component.A total of 100pins are provided on this board.A voltage of 3.6V is the maximum supply voltage for this device.Despite its minimal supply voltage of [0], it is capable of operating.There are 80 Programmable I/Os.It is possible to achieve a frequency of 1.8797GHz.Ideally, the operating temperature should be greater than -40°C.The operating temperature should be lower than 100°C.In total, it contains 24 logic blocks (LABs).There are 240 logic elements/cells to form a fundamental building block. The maximum frequency should not exceed 304MHz.In the devices, there is a memory of 1kBthat can be used to store programs and data.
EPM240F100I5N Features
FBGA package
80 I/Os
100 pin count
100 pins
24 logic blocks (LABs)
EPM240F100I5N Applications
There are a lot of Altera EPM240F100I5N CPLDs applications.
- PULSE WIDTH MODULATION (PWM)
- Dedicated input registers
- Software-Driven Hardware Configuration
- Custom state machines
- Wireless Infrastructure Base Band Unit and Remote Radio Unit
- ON-CHIP OSCILLATOR CIRCUIT
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
- Field programmable gate
- Power up sequencing
- I/O expansion
