EPM240GT100C3
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 100 |
| Packaging | Bulk |
| Published | 2003 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | 0°C |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 235 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Frequency | 3.01205GHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 100 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.8V |
| Temperature Grade | COMMERCIAL EXTENDED |
| Max Supply Voltage | 1.89V |
| Min Supply Voltage | 1.71V |
| Memory Size | 1kB |
| Operating Supply Current | 40mA |
| Number of I/O | 80 |
| Nominal Supply Current | 40mA |
| Memory Type | FLASH |
| Propagation Delay | 4.7 ns |
| Frequency (Max) | 304MHz |
| Number of Logic Elements/Cells | 240 |
| Number of Programmable I/O | 80 |
| Number of Logic Blocks (LABs) | 24 |
| Output Function | MACROCELL |
| Number of Macro Cells | 192 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 1.2mm |
| Length | 14mm |
| Width | 14mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
EPM240GT100C3 Overview
There are 192 macro cells, which provide radio coverage via high-power cell towers, antennas or masts in a mobile phone network.There is a TQFP package containing it.In this case, there are 80 I/Os programmed.The device is programmed with 100 terminations.This electrical part has a terminal position of QUADand is connected to the ground.Power is supplied by a voltage of 1.8V volts.The part is included in Programmable Logic Devices.It is recommended that the chip be packaged by Bulk.There are 100 pins on the chip.When using this device, YEScan also be found.If high efficiency is to be achieved, the supply voltage should be maintained at [0].It is adopted to store data in [0].The electronic part is mounted by Surface Mount.There are 100 pins on the device.With a maximum supply voltage of [0], it operates.Despite its minimal supply voltage of [0], it is capable of operating.There are 80 Programmable I/Os.This can be achieved at a frequency of 3.01205GHz.It is recommended that the operating temperature exceed 0°C.Temperatures should not exceed 85°C.In its simplest form, it consists of 24 logic blocks (LABs).There are 240 logic elements/cells to form a fundamental building block. It is recommended that the maximum frequency be less than 304MHz.Using the devices' 1kBmemory, programs and data can be stored.
EPM240GT100C3 Features
TQFP package
80 I/Os
100 pin count
100 pins
24 logic blocks (LABs)
EPM240GT100C3 Applications
There are a lot of Altera EPM240GT100C3 CPLDs applications.
- State machine control
- Auxiliary Power Supply Isolated and Non-isolated
- Programmable polarity
- Programmable power management
- Bootloaders for FPGAs
- Page register
- Preset swapping
- Multiple Clock Source Selection
- Battery operated portable devices
- ToR/Aggregation/Core Switch and Router
