EPM240GT100C3N
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 100 |
| Packaging | Bulk |
| Published | 2003 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 100 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | 0°C |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Frequency | 304MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 100 |
| Operating Supply Voltage | 1.8V |
| Temperature Grade | OTHER |
| Max Supply Voltage | 1.89V |
| Min Supply Voltage | 1.71V |
| Memory Size | 1kB |
| Operating Supply Current | 40mA |
| Number of I/O | 80 |
| Nominal Supply Current | 40mA |
| Memory Type | FLASH |
| Propagation Delay | 4.7 ns |
| Turn On Delay Time | 4.7 ns |
| Frequency (Max) | 304MHz |
| Number of Logic Elements/Cells | 240 |
| Number of Programmable I/O | 80 |
| Number of Logic Blocks (LABs) | 24 |
| Speed Grade | 3 |
| Output Function | MACROCELL |
| Number of Macro Cells | 192 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height | 1mm |
| Length | 14mm |
| Width | 14mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
EPM240GT100C3N Overview
The mobile phone network has 192 macro cells, which are cells that provide radio coverage from high-power cell sites (towers, antennas, or masts).It is part of the TQFP package.The device has 80inputs and outputs.The device is programmed with 100 terminations.This electrical part is wired with a terminal position of QUAD.The power source is powered by 1.8Vvolts.There is a part included in Programmable Logic Devices.It is recommended that the chip be packaged by Bulk.It has 100pins programmed.High efficiency requires the supply voltage to be maintained at [0].In this case, FLASHwill be used to store the data.This device is mounted by Surface Mount.This board has 100 pins.It operates with the maximal supply voltage of 1.89V.A minimum supply voltage of 1.71V is required for this device to operate.Programmable I/Os are counted up 80.This frequency is 304MHz.It is recommended that the operating temperature be higher than 0°C.It is recommended that the operating temperature be below 85°C.In its simplest form, it consists of 24 logic blocks (LABs).A fundamental building block consists of 240logic elements/cells.It is recommended that the maximal frequency be lower than 304MHz.Devices include a memory of 1kBavailable for the storage of programs and data.
EPM240GT100C3N Features
TQFP package
80 I/Os
100 pin count
100 pins
24 logic blocks (LABs)
EPM240GT100C3N Applications
There are a lot of Altera EPM240GT100C3N CPLDs applications.
- PULSE WIDTH MODULATION (PWM)
- I/O expansion
- Programmable power management
- Power Meter SMPS
- Digital designs
- SUPERVISORY FUNCTION (LVD AND WATCHDOG)
- STANDARD SERIAL INTERFACE UART
- Multiple DIP Switch Replacement
- DMA control
- Address decoders
