EPM240GT100C3N
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 100-TQFP |
| Surface Mount | YES |
| Operating Temperature | 0°C~85°C TJ |
| Packaging | Tray |
| Published | 2003 |
| Series | MAX® II |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | MATTE TIN (472) OVER COPPER |
| Additional Feature | IT CAN ALSO OPERATE AT 3.3V |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | EPM240 |
| JESD-30 Code | S-PQFP-G100 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 1.89V |
| Power Supplies | 1.5/3.31.8V |
| Supply Voltage-Min (Vsup) | 1.71V |
| Programmable Type | In System Programmable |
| Number of I/O | 80 |
| Propagation Delay | 4.7 ns |
| Output Function | MACROCELL |
| Number of Macro Cells | 192 |
| JTAG BST | YES |
| Voltage Supply - Internal | 1.71V~1.89V |
| Delay Time tpd(1) Max | 4.7ns |
| Number of Logic Elements/Blocks | 240 |
| Height Seated (Max) | 1.2mm |
| Length | 14mm |
| Width | 14mm |
| RoHS Status | RoHS Compliant |
EPM240GT100C3N Overview
This network has 192macro cells, which are cells that provide radio coverage provided by a high-power cell site (tower, antenna, mast).It is embedded in the 100-TQFP package.There are 80 I/Os on the board.It is programmed that device terminations will be 100 .This electrical part is wired with a terminal position of QUAD.It is powered from a supply voltage of 1.8V.It is included in Programmable Logic Devices.It is recommended that the chip be packaged by Tray.To ensure reliability, the device operates at a temperature of [0].Chips should be mounted by Surface Mount.In terms of FPGAs, it belongs to the MAX? II series.The device can also be used to find [0].In accordance with the [0], its related parts are listed.A total of 240logic elements/blocks are present.In order for the device to operate, it requires 1.5/3.31.8V power supplies.In this case, the maximum supply voltage (Vsup) reaches 1.89V.It should be possible for Vsup to exceed 1.71Vat the supply voltage.
EPM240GT100C3N Features
100-TQFP package
80 I/Os
The operating temperature of 0°C~85°C TJ
1.5/3.31.8V power supplies
EPM240GT100C3N Applications
There are a lot of Intel EPM240GT100C3N CPLDs applications.
- DMA control
- D/T registers and latches
- Bootloaders for FPGAs
- POWER-SAVING MODES
- Programmable polarity
- Software-driven hardware configuration
- I/O expansion
- Timing control
- Programmable power management
- SUPERVISORY FUNCTION (LVD AND WATCHDOG)
