EPM240GT100C4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 100 |
| Packaging | Bulk |
| Published | 2003 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | 0°C |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 235 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Frequency | 2.3148GHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 100 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.8V |
| Temperature Grade | COMMERCIAL EXTENDED |
| Max Supply Voltage | 1.89V |
| Min Supply Voltage | 1.71V |
| Memory Size | 1kB |
| Operating Supply Current | 40mA |
| Number of I/O | 80 |
| Nominal Supply Current | 40mA |
| Memory Type | FLASH |
| Propagation Delay | 6.1 ns |
| Turn On Delay Time | 6.1 ns |
| Frequency (Max) | 304MHz |
| Number of Logic Elements/Cells | 240 |
| Number of Programmable I/O | 80 |
| Number of Logic Blocks (LABs) | 24 |
| Speed Grade | 4 |
| Output Function | MACROCELL |
| Number of Macro Cells | 192 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 1.2mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
EPM240GT100C4 Overview
The mobile phone network has 192 macro cells, which are cells that provide radio coverage from high-power cell sites (towers, antennas, or masts).It is contained in package [0].As a result, it has 80 I/O ports programmed.100terminations are programmed into the device.As the terminal position of this electrical part is [0], it serves as an important access point for passengers and freight.An electrical supply voltage of 1.8V is used to power it.The part is included in Programmable Logic Devices.The chip should be packaged by Bulk.There are 100 pins on the chip.It is also characterized by YES.High efficiency requires a voltage supply of [0].For data storage, FLASHis adopted.Surface Mountis used to mount this electronic component.The device has a pinout of [0].A voltage of 1.89V is the maximum supply voltage for this device.The minimal supply voltage is 1.71V.There are 80 programmable I/Os in this system.This can be achieved at a frequency of 2.3148GHz.In order to operate, the temperature should be higher than 0°C.Ideally, the operating temperature should be below 85°C.There are 24 logic blocks (LABs) in its basic building block.An elementary building block consists of 240logic elements/cells.It is recommended that the maximal frequency be less than 0.In the devices, there is a memory of 1kBthat can be used to store programs and data.
EPM240GT100C4 Features
TQFP package
80 I/Os
100 pin count
100 pins
24 logic blocks (LABs)
EPM240GT100C4 Applications
There are a lot of Altera EPM240GT100C4 CPLDs applications.
- Power up sequencing
- SUPERVISORY FUNCTION (LVD AND WATCHDOG)
- LED Lighting systems
- Custom shift registers
- USB Bus
- PULSE WIDTH MODULATION (PWM)
- Address decoders
- Auxiliary Power Supply Isolated and Non-isolated
- Code converters
- I2C BUS INTERFACE
