EPM240GT100C5
| Parameters | |
|---|---|
| Number of Macro Cells | 192 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 1.2mm |
| Length | 14mm |
| Width | 14mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 100 |
| Packaging | Bulk |
| Published | 2003 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | 0°C |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 235 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Frequency | 1.8797GHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 100 |
| Operating Supply Voltage | 1.8V |
| Temperature Grade | COMMERCIAL EXTENDED |
| Max Supply Voltage | 1.89V |
| Min Supply Voltage | 1.71V |
| Memory Size | 1kB |
| Operating Supply Current | 40mA |
| Number of I/O | 80 |
| Nominal Supply Current | 40mA |
| Memory Type | FLASH |
| Propagation Delay | 7.5 ns |
| Turn On Delay Time | 7.5 ns |
| Frequency (Max) | 304MHz |
| Number of Logic Elements/Cells | 240 |
| Number of Programmable I/O | 80 |
| Number of Logic Blocks (LABs) | 24 |
| Output Function | MACROCELL |
EPM240GT100C5 Overview
The mobile phone network has 192 macro cells, which are cells that provide radio coverage from high-power cell sites (towers, antennas, or masts).You can find it in package [0].As you can see, this device has 80 I/O ports programmed into it.There is a 100terminations set on devices.QUADis the terminal position of this electrical part.It is powered by a voltage of 1.8V volts.It belongs to the family [0].Bulkis the packaging method.There are 100pins on the chip.If you use this device, you will also find [0].It is recommended that the supply voltage be kept at 1.8Vto maximize efficiency.It is adopted to store data in [0].Surface Mountmounts this electronic component.It is designed with 100 pins.There is a maximum supply voltage of 1.89Vwhen the device is operating.In order for it to operate, a supply voltage of 1.71Vis required.There are 80 programmable I/Os, which are method of data transmissions, via input/output (I/O), between a central processing unit (CPU) and a peripheral device, such as a network adapter or a Parallel ATA storage device. This frequency can be achieved at 1.8797GHz.Ideally, the operating temperature should be greater than 0°C.There should be a temperature below 85°Cat the time of operation.Its basic building block is composed of 24 logic blocks (LABs).An elementary building block consists of 240logic elements/cells.Maximum frequency should be less than 304MHz.The devices contain a memory of 1kBfor storing programs and data.
EPM240GT100C5 Features
TQFP package
80 I/Os
100 pin count
100 pins
24 logic blocks (LABs)
EPM240GT100C5 Applications
There are a lot of Altera EPM240GT100C5 CPLDs applications.
- Software Configuration of Add-In Boards
- Software-driven hardware configuration
- Cross-Matrix Switch
- ToR/Aggregation/Core Switch and Router
- State machine control
- SUPERVISORY FUNCTION (LVD AND WATCHDOG)
- I/O expansion
- Software-Driven Hardware Configuration
- PLC analog input modules
- Random logic replacement
