Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Package / Case |
TQFP |
Number of Pins |
100 |
Published |
2003 |
JESD-609 Code |
e0 |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
3 |
Number of Terminations |
100 |
ECCN Code |
EAR99 |
Terminal Finish |
Tin/Lead (Sn/Pb) |
Max Operating Temperature |
100°C |
Min Operating Temperature |
-40°C |
Additional Feature |
YES |
HTS Code |
8542.39.00.01 |
Subcategory |
Programmable Logic Devices |
Technology |
CMOS |
Terminal Position |
QUAD |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
235 |
Supply Voltage |
1.8V |
Terminal Pitch |
0.5mm |
Frequency |
1.8797GHz |
Time@Peak Reflow Temperature-Max (s) |
30 |
Pin Count |
100 |
Operating Supply Voltage |
1.8V |
Max Supply Voltage |
1.89V |
Min Supply Voltage |
1.71V |
Memory Size |
1kB |
Operating Supply Current |
40mA |
Number of I/O |
80 |
Nominal Supply Current |
40mA |
Memory Type |
FLASH |
Propagation Delay |
7.5 ns |
Turn On Delay Time |
7.5 ns |
Frequency (Max) |
304MHz |
Number of Logic Elements/Cells |
240 |
Number of Programmable I/O |
80 |
Number of Logic Blocks (LABs) |
24 |
Output Function |
MACROCELL |
Number of Macro Cells |
192 |
JTAG BST |
YES |
In-System Programmable |
YES |
Height Seated (Max) |
1.2mm |
Length |
14mm |
Width |
14mm |
Radiation Hardening |
No |
RoHS Status |
RoHS Compliant |
Lead Free |
Contains Lead |
EPM240GT100I5 Overview
This network has 192macro cells, which are cells that provide radio coverage provided by a high-power cell site (tower, antenna, mast).It is part of the TQFP package.The device is programmed with 80 I/Os.There is a 100terminations set on devices.This electrical component has a terminal position of 0.It is powered by a voltage of 1.8V volts.This part is in the family [0].In this chip, the 100pins are programmed.It is also characterized by YES.If high efficiency is desired, the supply voltage should be kept at [0].Data is stored using [0].Surface Mountis the mounting point of this electronic part.The 100pins are designed into the board.A maximum supply voltage of 1.89Vis used in its operation.It operates with the minimal supply voltage of 1.71V.Programmable I/Os are counted up 80.There can be 1.8797GHz frequency achieved.In order to operate, the temperature should be higher than -40°C.The operating temperature should be lower than 100°C.There are 24 logic blocks (LABs) in its basic building block.In order to form a fundamental building block, there are 240logic elements/cells.It is recommended that the maximal frequency be less than 0.Devices are equipped with a memory capacity of 1kBfor storing programs and data.
EPM240GT100I5 Features
TQFP package
80 I/Os
100 pin count
100 pins
24 logic blocks (LABs)
EPM240GT100I5 Applications
There are a lot of Altera EPM240GT100I5 CPLDs applications.
- Parity generators
- TIMERS/COUNTERS
- Auxiliary Power Supply Isolated and Non-isolated
- LED Lighting systems
- DMA control
- Storage Cards and Storage Racks
- State machine design
- Cross-Matrix Switch
- PLC analog input modules
- INTERRUPT SYSTEM