EPM240GT100I5N
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 100 |
| Published | 2003 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 100°C |
| Min Operating Temperature | -40°C |
| Additional Feature | IT CAN ALSO OPERATE AT 3.3V |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Frequency | 1.8797GHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 100 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.8V |
| Max Supply Voltage | 1.89V |
| Min Supply Voltage | 1.71V |
| Memory Size | 1kB |
| Operating Supply Current | 40mA |
| Number of I/O | 80 |
| Nominal Supply Current | 40mA |
| Memory Type | FLASH |
| Propagation Delay | 7.5 ns |
| Turn On Delay Time | 7.5 ns |
| Frequency (Max) | 304MHz |
| Number of Logic Elements/Cells | 240 |
| Number of Programmable I/O | 80 |
| Number of Logic Blocks (LABs) | 24 |
| Speed Grade | 5 |
| Output Function | MACROCELL |
| Number of Macro Cells | 192 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 1.2mm |
| Length | 14mm |
| Width | 14mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
EPM240GT100I5N Overview
The mobile phone network has 192 macro cells, which are cells that provide radio coverage from high-power cell sites (towers, antennas, or masts).The product is contained in a TQFP package.The device is programmed with 80 I/O ports.The termination of a device is set to [0].There is a QUADterminal position on the electrical part in question.An electrical supply voltage of 1.8V is used to power it.There is a part included in Programmable Logic Devices.There are 100 pins on the chip.When using this device, IT CAN ALSO OPERATE AT 3.3Vis also available.High efficiency requires the supply voltage to be maintained at [0].In this case, FLASHwill be used to store the data.Surface Mountmounts this electronic component.A total of 100pins are provided on this board.There is a maximum supply voltage of 1.89V.Despite its minimal supply voltage of [0], it is capable of operating.In total, there are 80programmable I/Os.The frequency that can be achieved is 1.8797GHz.It is recommended that the operating temperature exceed -40°C.A temperature below 100°Cshould be used as the operating temperature.There are 24 logic blocks (LABs) in its basic building block.As a fundamental building block, there are 240 logic elements/cells.It is recommended that the maximum frequency is less than 0.Devices contain a 1kBmemory for storing data and programs.
EPM240GT100I5N Features
TQFP package
80 I/Os
100 pin count
100 pins
24 logic blocks (LABs)
EPM240GT100I5N Applications
There are a lot of Altera EPM240GT100I5N CPLDs applications.
- Discrete logic functions
- D/T registers and latches
- Custom state machines
- PULSE WIDTH MODULATION (PWM)
- Custom shift registers
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
- Power Meter SMPS
- STANDARD SERIAL INTERFACE UART
- Wide Vin Industrial low power SMPS
- Software-driven hardware configuration
