EPM240M100C4N
| Parameters | |
|---|---|
| Speed Grade | 4 |
| Output Function | MACROCELL |
| Number of Macro Cells | 192 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height | 1mm |
| Length | 6mm |
| Width | 6mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | TFBGA |
| Number of Pins | 100 |
| Published | 2003 |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 100 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | 0°C |
| Additional Feature | IT CAN ALSO OPERATE AT 3.3V |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Frequency | 304MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 100 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | OTHER |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.375V |
| Memory Size | 1kB |
| Operating Supply Current | 55mA |
| Number of I/O | 80 |
| Nominal Supply Current | 55mA |
| Memory Type | FLASH |
| Propagation Delay | 6.1 ns |
| Turn On Delay Time | 6.1 ns |
| Frequency (Max) | 304MHz |
| Number of Logic Elements/Cells | 240 |
| Number of Programmable I/O | 80 |
| Number of Logic Blocks (LABs) | 24 |
EPM240M100C4N Overview
In the mobile phone network, there are 192macro cells, which are cells with high-power antennas and towers.The item is packaged with TFBGA.In this case, there are 80 I/Os programmed.The termination of a device is set to [0].This electrical part is wired with a terminal position of BOTTOM.An electrical supply voltage of 2.5V is used to power it.There is a part in the family [0].The chip is programmed with 100 pins.If you use this device, you will also find [0].Optimal efficiency requires a supply voltage of [0].In general, it is recommended to store data in [0].Surface Mountis the mounting point of this electronic part.It is designed with 100 pins.A voltage of 3.6V is the maximum supply voltage for this device.It operates with the minimal supply voltage of 2.375V.There are a total of 80 Programmable I/Os.There is a maximum frequency of 304MHz.It is recommended that the operating temperature be greater than 0°C.Temperatures should be lower than 85°C when operating.There are 24 logic blocks (LABs) in its basic building block.An elementary building block consists of 240logic elements/cells.It is recommended that the maximum frequency be less than 304MHz.The devices contain a memory of 1kBthat can be used to store programs and data.
EPM240M100C4N Features
TFBGA package
80 I/Os
100 pin count
100 pins
24 logic blocks (LABs)
EPM240M100C4N Applications
There are a lot of Altera EPM240M100C4N CPLDs applications.
- Digital systems
- Field programmable gate
- Digital designs
- Reset swapping
- ROM patching
- Address decoders
- Timing control
- Handheld digital devices
- Page register
- I/O PORTS (MCU MODULE)
