EPM240M100C5N
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | BGA |
| Number of Pins | 100 |
| Published | 2003 |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | 0°C |
| Additional Feature | IT CAN ALSO OPERATE AT 3.3V |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.5V |
| Frequency | 304MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 100 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | OTHER |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.375V |
| Memory Size | 1kB |
| Operating Supply Current | 55mA |
| Number of I/O | 80 |
| Nominal Supply Current | 55mA |
| Memory Type | FLASH |
| Propagation Delay | 7.5 ns |
| Turn On Delay Time | 7.5 ns |
| Frequency (Max) | 304MHz |
| Number of Logic Elements/Cells | 240 |
| Number of Programmable I/O | 80 |
| Number of Logic Blocks (LABs) | 24 |
| Speed Grade | 5 |
| Output Function | MACROCELL |
| Number of Macro Cells | 192 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
EPM240M100C5N Overview
There are 192 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).The item is enclosed in a BGA package.This device has 80 I/O ports programmed into it.100terminations are programmed into the device.Its terminal position is BOTTOM.The device is powered by a voltage of 2.5V volts.There is a part in the family [0].100pins are programmed on the chip.This device is also capable of displaying [0].The supply voltage should be maintained at 3.3V for high efficiency.In general, it is recommended to store data in [0].The electronic part is mounted by Surface Mount.The pins are [0].A voltage of 3.6V is the maximum supply voltage for this device.It is powered by 2.375Vas its minimum supply voltage.Programmable I/Os are counted up 80.There can be 304MHz frequency achieved.Operating temperatures should be higher than 0°C.Temperatures should not exceed 85°C.In its simplest form, it consists of 24 logic blocks (LABs).In order to form a fundamental building block, there are 240 logic elements or cells.There should be a lower maximum frequency than 304MHz.The devices embed a memory of 1kB available for storing programs and datas.
EPM240M100C5N Features
BGA package
80 I/Os
100 pin count
100 pins
24 logic blocks (LABs)
EPM240M100C5N Applications
There are a lot of Altera EPM240M100C5N CPLDs applications.
- Digital designs
- Timing control
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
- Auxiliary Power Supply Isolated and Non-isolated
- Battery operated portable devices
- Complex programmable logic devices
- Parity generators
- TIMERS/COUNTERS
- Cross-Matrix Switch
- ANALOG-TO-DIGITAL CONVERTOR (ADC)
