EPM240T100C3
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 100 |
| Packaging | Bulk |
| Published | 2003 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | 0°C |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 235 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Frequency | 3.01205GHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 100 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL EXTENDED |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.375V |
| Memory Size | 1kB |
| Operating Supply Current | 55mA |
| Number of I/O | 80 |
| Nominal Supply Current | 55mA |
| Memory Type | FLASH |
| Propagation Delay | 4.7 ns |
| Turn On Delay Time | 4.7 ns |
| Frequency (Max) | 304MHz |
| Number of Logic Elements/Cells | 240 |
| Number of Programmable I/O | 80 |
| Number of Logic Blocks (LABs) | 24 |
| Speed Grade | 3 |
| Output Function | MACROCELL |
| Number of Macro Cells | 192 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 1.2mm |
| Length | 14mm |
| Width | 14mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
EPM240T100C3 Overview
There are 192 macro cells, which provide radio coverage via high-power cell towers, antennas or masts in a mobile phone network.You can find it in package [0].As you can see, this device has 80 I/O ports programmed into it.There are 100 terminations programmed into the device.This electrical part is wired with a terminal position of QUAD.The power source is powered by 2.5Vvolts.The part belongs to Programmable Logic Devices family.Package the chip by Bulk.There are 100 pins on the chip.A high level of efficiency can be achieved by maintaining the supply voltage at [0].It is recommended to store data in [0].A Surface Mountis mounted on this electronic component.It is designed with 100 pins.There is a maximum supply voltage of 3.6V.In order for it to operate, a supply voltage of 2.375Vis required.A total of 80Programmable I/Os are present.You can achieve 3.01205GHzfrequencies.In order to operate properly, the operating temperature should be higher than 0°C.A temperature below 85°Cshould be used as the operating temperature.There are 24 logic blocks (LABs) in its basic building block.Basic building blocks have 240logic elements.The maximal frequency should be lower than 304MHz.These devices are capable of storing programs and data in 1kBmemory.
EPM240T100C3 Features
TQFP package
80 I/Os
100 pin count
100 pins
24 logic blocks (LABs)
EPM240T100C3 Applications
There are a lot of Altera EPM240T100C3 CPLDs applications.
- I/O expansion
- SUPERVISORY FUNCTION (LVD AND WATCHDOG)
- Complex programmable logic devices
- Handheld digital devices
- Pattern recognition
- Interface bridging
- Boolean function generators
- Software-Driven Hardware Configuration
- DDC INTERFACE
- ToR/Aggregation/Core Switch and Router
