EPM240T100C3N
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 100 |
| Weight | 657.000198mg |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 100 |
| Termination | SMD/SMT |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | 0°C |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Frequency | 304MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 100 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | OTHER |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.375V |
| Memory Size | 1kB |
| Operating Supply Current | 55mA |
| Number of I/O | 80 |
| Memory Type | FLASH |
| Propagation Delay | 4.7 ns |
| Turn On Delay Time | 4.7 ns |
| Frequency (Max) | 304MHz |
| Number of Logic Elements/Cells | 240 |
| Number of Logic Blocks (LABs) | 24 |
| Speed Grade | 3 |
| Output Function | MACROCELL |
| Number of Macro Cells | 192 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height | 1mm |
| Length | 14mm |
| Width | 14mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
EPM240T100C3N Overview
There are 192 macro cells, which are cells in a mobile phone network that provides radio coverage served by a high-power cell site (tower, antenna or mast).A TQFP package contains the item.There are 80 I/Os programmed in it.There are 100 terminations programmed into the device.Its terminal position is QUAD.A voltage of 2.5V is used as the power supply for this device.This part is part of the family [0].Chips are programmed with 100 pins.A high level of efficiency can be achieved by maintaining the supply voltage at [0].For storing data, it is recommended to use [0].This electronic part is mounted in the way of Surface Mount.The 100pins are designed into the board.This device operates at a voltage of 3.6V when the maximum supply voltage is applied.The minimal supply voltage is 2.375V.There is 304MHz frequency that can be achieved.The operating temperature should be higher than 0°C.Temperatures should be lower than 85°C when operating.It consists of 24 logic blocks (LABs).A fundamental building block of logic consists of 240logic elements/cells.A maximum frequency of less than 304MHzis recommended.Devices are equipped with a memory capacity of 1kBfor storing programs and data.
EPM240T100C3N Features
TQFP package
80 I/Os
100 pin count
100 pins
24 logic blocks (LABs)
EPM240T100C3N Applications
There are a lot of Altera EPM240T100C3N CPLDs applications.
- High speed graphics processing
- Storage Cards and Storage Racks
- Battery operated portable devices
- Digital designs
- Power Meter SMPS
- Pattern recognition
- Custom shift registers
- Digital multiplexers
- Page register
- Timing control
