EPM240T100C4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 100 |
| Packaging | Bulk |
| Published | 2003 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | 0°C |
| Additional Feature | IT CAN ALSO OPERATE AT 3.3V |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 235 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Frequency | 2.3148GHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 100 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL EXTENDED |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.375V |
| Memory Size | 1kB |
| Operating Supply Current | 55mA |
| Number of I/O | 80 |
| Nominal Supply Current | 55mA |
| Memory Type | FLASH |
| Propagation Delay | 6.1 ns |
| Turn On Delay Time | 6.1 ns |
| Frequency (Max) | 304MHz |
| Number of Logic Elements/Cells | 240 |
| Number of Programmable I/O | 80 |
| Number of Logic Blocks (LABs) | 24 |
| Output Function | MACROCELL |
| Number of Macro Cells | 192 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 1.2mm |
| Length | 14mm |
| Width | 14mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
EPM240T100C4 Overview
There are 192 macro cells in the network, which are high-power cell sites that provide radio coverage (tower, antenna, or mast) for a mobile phone network.In the TQFPpackage, you will find it.This device has 80 I/O ports programmed into it.There is a 100terminations set on devices.There is a QUADterminal position on the electrical part in question.A voltage of 2.5V is used as the power supply for this device.It is a part of family [0].Bulkis the packaging method.The chip is programmed with 100 pins.If you use this device, you will also find [0].The supply voltage should be maintained at 3.3V for high efficiency.For storing data, it is recommended to use [0].In this case, Surface Mountis used to mount the electronic component.There are 100 pins on the device.A maximum supply voltage of 3.6Vis used in its operation.Despite its minimal supply voltage of [0], it is capable of operating.There are 80 programmable I/Os in this system.A frequency of 2.3148GHzcan be achieved.It is recommended that the operating temperature exceed 0°C.A temperature lower than 85°Cis recommended for operation.It is composed of 24 logic blocks (LABs).As a fundamental building block, there are 240 logic elements/cells.It is recommended that the maximum frequency be less than 304MHz.The devices contain a memory of 1kBthat can be used to store programs and data.
EPM240T100C4 Features
TQFP package
80 I/Os
100 pin count
100 pins
24 logic blocks (LABs)
EPM240T100C4 Applications
There are a lot of Altera EPM240T100C4 CPLDs applications.
- Cross-Matrix Switch
- Wireless Infrastructure Base Band Unit and Remote Radio Unit
- Code converters
- Digital multiplexers
- Reset swapping
- DMA control
- Handheld digital devices
- Interface bridging
- LED Lighting systems
- Digital designs
