EPM240T100C4N
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 100 |
| Weight | 657.000198mg |
| Published | 2003 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 100 |
| Termination | SMD/SMT |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | 0°C |
| Additional Feature | IT CAN ALSO OPERATE AT 3.3V |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Frequency | 304MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 100 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | OTHER |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.375V |
| Memory Size | 1kB |
| Operating Supply Current | 55mA |
| Number of I/O | 80 |
| Memory Type | FLASH |
| Propagation Delay | 6.1 ns |
| Turn On Delay Time | 6.1 ns |
| Frequency (Max) | 304MHz |
| Number of Logic Elements/Cells | 240 |
| Number of Logic Blocks (LABs) | 24 |
| Speed Grade | 4 |
| Output Function | MACROCELL |
| Number of Macro Cells | 192 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height | 1mm |
| Length | 14mm |
| Width | 14mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
EPM240T100C4N Overview
192 macrocells are present in the mobile phone network, which offer radio coverage from a high-power cell tower, antenna, or mast.It is embedded in the TQFP package.The device is programmed with 80 I/O ports.There are 100 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.This electrical part has a terminal position of [0], which serves as an important point of access for passengers and freight.There is 2.5V voltage supply for this device.The part is included in Programmable Logic Devices.A chip with 100pins is programmed.This device is also capable of displaying [0].Optimal efficiency requires a supply voltage of [0].In general, it is recommended to store data in [0].The electronic part is mounted by Surface Mount.There are 100pins on it.This device operates at a voltage of 3.6Vas its maximum supply voltage.It operates with the minimal supply voltage of 2.375V.This frequency is 304MHz.It is recommended that the operating temperature be greater than 0°C.Temperatures should not exceed 85°C.The program consists of 24 logic blocks (LABs).The fundamental building block consists of 240logic elements/cells.A maximum frequency of less than 304MHzis recommended.In the devices, there is a memory of 1kBthat can be used to store programs and data.
EPM240T100C4N Features
TQFP package
80 I/Os
100 pin count
100 pins
24 logic blocks (LABs)
EPM240T100C4N Applications
There are a lot of Altera EPM240T100C4N CPLDs applications.
- Handheld digital devices
- Power up sequencing
- Parity generators
- LED Lighting systems
- White goods (Washing, Cold, Aircon ,...)
- TIMERS/COUNTERS
- Preset swapping
- Storage Cards and Storage Racks
- Dedicated input registers
- STANDARD SERIAL INTERFACE UART
