EPM240T100C5N
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 100 |
| Published | 2003 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 100 |
| Termination | SMD/SMT |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | 0°C |
| Additional Feature | IT CAN ALSO OPERATE AT 3.3V |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.5V |
| Frequency | 304MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 100 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | OTHER |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.375V |
| Memory Size | 1kB |
| Operating Supply Current | 55mA |
| Number of I/O | 80 |
| Nominal Supply Current | 55mA |
| Memory Type | FLASH |
| Propagation Delay | 7.5 ns |
| Turn On Delay Time | 7.5 ns |
| Frequency (Max) | 304MHz |
| Number of Inputs | 80 |
| Number of Logic Elements/Cells | 240 |
| Number of Logic Blocks (LABs) | 24 |
| Speed Grade | 5 |
| Output Function | MACROCELL |
| Number of Macro Cells | 192 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height | 1mm |
| Length | 14mm |
| Width | 14mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
EPM240T100C5N Overview
In the mobile phone network, there are 192macro cells, which are cells with high-power antennas and towers.It is part of the TQFP package.The device has 80inputs and outputs.100terminations are programmed into the device.There is a QUADterminal position on the electrical part in question.The device is powered by a voltage of 2.5V volts.It belongs to the family [0].With 100pins programmed, the chip is ready to use.This device can also display [0].For high efficiency, the supply voltage should be maintained at [0].Data storage is performed using [0].This device is mounted by Surface Mount.This board has 100 pins.A maximum supply voltage of 3.6Vis used in its operation.Normally, it operates with a voltage of 2.375VV as its minimum supply voltage.This can be achieved at a frequency of 304MHz.Operating temperatures should be higher than 0°C.The operating temperature should be lower than 85°C.Its basic building block is composed of 24 logic blocks (LABs).There are 240 logic elements/cells on the device.The maximal frequency should be lower than 304MHz.These devices are capable of storing programs and data in 1kBmemory.There are 80 inputs on the device.
EPM240T100C5N Features
TQFP package
80 I/Os
100 pin count
100 pins
24 logic blocks (LABs)
EPM240T100C5N Applications
There are a lot of Altera EPM240T100C5N CPLDs applications.
- State machine control
- STANDARD SERIAL INTERFACE UART
- Code converters
- Reset swapping
- Voltage level translation
- Configurable Addressing of I/O Boards
- PULSE WIDTH MODULATION (PWM)
- State machine design
- DMA control
- Storage Cards and Storage Racks
