EPM3032ALC44-10
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 44 |
| Published | 1998 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 44 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 220 |
| Supply Voltage | 3.3V |
| Frequency | 125MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 44 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 34 |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 10 ns |
| Frequency (Max) | 227.3MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 600 |
| Number of Programmable I/O | 34 |
| Number of Logic Blocks (LABs) | 2 |
| Speed Grade | 10 |
| Output Function | MACROCELL |
| Number of Macro Cells | 32 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height | 3.81mm |
| Length | 16.59mm |
| Width | 16.59mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
EPM3032ALC44-10 Overview
There are 32 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).The product is contained in a PLCC package.As you can see, this device has 34 I/O ports programmed into it.Terminations of devices are set to [0].This electrical part is wired with a terminal position of QUAD.It is powered from a supply voltage of 3.3V.There is a part included in Programmable Logic Devices.The chip is programmed with 44 pins.The device can also be used to find [0].600gates are used to construct digital circuits.For high efficiency, the supply voltage should be maintained at [0].EEPROM is adopted for storing data.In this case, it is mounted by Surface Mount.This board has 44 pins.A voltage of 3.6V is the maximum supply voltage for this device.A minimum supply voltage of 3V is required for this device to operate.There are 34 Programmable I/Os.You can achieve 125MHzfrequencies.Ideally, the operating temperature should be greater than 0°C.Temperatures should not exceed 70°C.The program consists of 2 logic blocks (LABs).There should be a lower maximum frequency than 227.3MHz.There are several types of programmable logic that can be categorized as EE PLD.
EPM3032ALC44-10 Features
PLCC package
34 I/Os
44 pin count
44 pins
2 logic blocks (LABs)
EPM3032ALC44-10 Applications
There are a lot of Altera EPM3032ALC44-10 CPLDs applications.
- Software-driven hardware configuration
- LED Lighting systems
- Protection relays
- Dedicated input registers
- Configurable Addressing of I/O Boards
- Programmable power management
- Power automation
- Preset swapping
- Timing control
- PLC analog input modules
