EPM3032ALI44-10N
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 44 |
| Published | 1998 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 245 |
| Supply Voltage | 3.3V |
| Frequency | 125MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 44 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 34 |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 10 ns |
| Frequency (Max) | 227.3MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 600 |
| Number of Programmable I/O | 34 |
| Number of Logic Blocks (LABs) | 2 |
| Speed Grade | 10 |
| Output Function | MACROCELL |
| Number of Macro Cells | 32 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height | 3.81mm |
| Length | 16.59mm |
| Width | 16.59mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
EPM3032ALI44-10N Overview
A mobile phone network consists of 32macro cells, which are radio coverage cells served by a high-power cell site (tower, antenna or mast).In the PLCCpackage, you will find it.It is programmed with 34 I/Os.44terminations are programmed into the device.As the terminal position of this electrical part is [0], it serves as an important access point for passengers or freight.It is powered by a voltage of 3.3V volts.It is a part of the family [0].It has 44pins programmed.It is also characterized by YES.It is possible to construct digital circuits using 600gates, which are devices that serve as building blocks.A high level of efficiency can be achieved by maintaining the supply voltage at [0].In this case, EEPROMwill be used to store the data.The electronic part is mounted by Surface Mount.The pins are [0].A maximum supply voltage of 3.6Vis used in its operation.It operates with the minimal supply voltage of 3V.A total of 34 Programmable I/Os are available.There can be 125MHz frequency achieved.In order to operate properly, the operating temperature should be higher than -40°C.It is recommended that the operating temperature be below 85°C.The logic block consists of 2 l logic blocks (LABs).It is recommended that the maximal frequency be less than 0.This kind of FPGA is composed of EE PLD.
EPM3032ALI44-10N Features
PLCC package
34 I/Os
44 pin count
44 pins
2 logic blocks (LABs)
EPM3032ALI44-10N Applications
There are a lot of Altera EPM3032ALI44-10N CPLDs applications.
- Configurable Addressing of I/O Boards
- Cross-Matrix Switch
- Reset swapping
- Field programmable gate
- Storage Cards and Storage Racks
- State machine control
- Power Meter SMPS
- POWER-SAVING MODES
- STANDARD SERIAL INTERFACE UART
- Software Configuration of Add-In Boards
