EPM3032ATC44-4
| Parameters | |
|---|---|
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 34 |
| Memory Type | EEPROM |
| Propagation Delay | 4.5 ns |
| Turn On Delay Time | 4.5 ns |
| Frequency (Max) | 227.3MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 600 |
| Number of Programmable I/O | 34 |
| Number of Logic Blocks (LABs) | 2 |
| Speed Grade | 4 |
| Output Function | MACROCELL |
| Number of Macro Cells | 32 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Length | 10mm |
| Width | 10mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 44 |
| Packaging | Bulk |
| Published | 1998 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 44 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 235 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 250MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 44 |
EPM3032ATC44-4 Overview
There are 32 macro cells, which are cells in a mobile phone network that provides radio coverage served by a high-power cell site (tower, antenna or mast).You can find it in package [0].It is equipped with 34I/O ports.Devices are programmed with terminations of [0].The terminal position of this electrical component is QUAD.An electrical supply voltage of 3.3V is used to power it.This part is included in Programmable Logic Devices.Bulkshould be used for packaging the chip.A chip with 44pins is programmed.It is also possible to find YESwhen using this device.As a building block for digital circuits, there are 600gates.The supply voltage should be maintained at 3.3V for high efficiency.For storing data, it is recommended to use [0].This electronic part is mounted in the way of Surface Mount.The device has a pinout of [0].A maximum voltage of 3.6Vis required for operation.In order for it to operate, a supply voltage of 3Vis required.A total of 34 Programmable I/Os are available.A frequency of 250MHzcan be achieved.It is recommended that the operating temperature be higher than 0°C.A temperature below 70°Cshould be used as the operating temperature.It consists of 2 logic blocks (LABs).There should be a lower maximum frequency than 227.3MHz.In programmable logic, a type of logic can be categorized as EE PLD.
EPM3032ATC44-4 Features
TQFP package
34 I/Os
44 pin count
44 pins
2 logic blocks (LABs)
EPM3032ATC44-4 Applications
There are a lot of Altera EPM3032ATC44-4 CPLDs applications.
- Pattern recognition
- Multiple DIP Switch Replacement
- Discrete logic functions
- Programmable polarity
- Code converters
- USB Bus
- Custom shift registers
- SUPERVISORY FUNCTION (LVD AND WATCHDOG)
- Synchronous or asynchronous mode
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
