EPM3032ATC44-4N
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 44 |
| Published | 1998 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 44 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 227.3MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 44 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 34 |
| Memory Type | EEPROM |
| Propagation Delay | 4.5 ns |
| Turn On Delay Time | 4.5 ns |
| Frequency (Max) | 227.3MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 600 |
| Number of Logic Blocks (LABs) | 2 |
| Speed Grade | 4 |
| Output Function | MACROCELL |
| Number of Macro Cells | 32 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Length | 10mm |
| Width | 10mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
EPM3032ATC44-4N Overview
There are 32 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).The product is contained in a TQFP package.There are 34 I/Os on the board.There is a 44terminations set on devices.As the terminal position of this electrical part is [0], it serves as an important access point for passengers or freight.The power supply voltage is 3.3V.It is a part of family [0].It has 44pins programmed.This device can also display [0].A digital circuit can be constructed using 600gates.A high level of efficiency can be achieved by maintaining the supply voltage at [0].It is adopted to store data in [0].This electronic part is mounted in the way of Surface Mount.44pins are included in its design.It operates at a maximum supply voltage of 3.6V volts.With a minimal supply voltage of [0], it operates.The frequency that can be achieved is 227.3MHz.In order to operate properly, the operating temperature should be higher than 0°C.A temperature less than 70°Cshould be used for operation.There are 2 logic blocks (LABs) in its basic building block.There should be a lower maximum frequency than 227.3MHz.A programmable logic type is categorized as EE PLD.
EPM3032ATC44-4N Features
TQFP package
34 I/Os
44 pin count
44 pins
2 logic blocks (LABs)
EPM3032ATC44-4N Applications
There are a lot of Altera EPM3032ATC44-4N CPLDs applications.
- STANDARD SERIAL INTERFACE UART
- Complex programmable logic devices
- PLC analog input modules
- Preset swapping
- Programmable power management
- Protection relays
- Software-Driven Hardware Configuration
- I/O expansion
- Custom shift registers
- Address decoding
