EPM3032ATC44-7N
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 44 |
| Published | 1998 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 44 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 138.9MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 44 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 34 |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Turn On Delay Time | 7.5 ns |
| Frequency (Max) | 227.3MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 600 |
| Number of Logic Blocks (LABs) | 2 |
| Speed Grade | 7 |
| Output Function | MACROCELL |
| Number of Macro Cells | 32 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Length | 10mm |
| Width | 10mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
EPM3032ATC44-7N Overview
32 macrocells are present in the mobile phone network, which offer radio coverage from a high-power cell tower, antenna, or mast.The item is packaged with TQFP.The device is programmed with 34 I/Os.The device is programmed with 44 terminations.The terminal position of this electrical component is QUAD.Power is provided by a supply voltage of 3.3V volts.It is a part of the family [0].There are 44pins on the chip.When using this device, YEScan also be found.It is possible to construct digital circuits using 600gates, which are devices that serve as building blocks.If high efficiency is to be achieved, the supply voltage should be maintained at [0].It is recommended that data be stored in [0].The electronic part is mounted by Surface Mount.A total of 44pins are provided on this board.It operates with the maximal supply voltage of 3.6V.With a minimal supply voltage of [0], it operates.There is a maximum frequency of 138.9MHz.Operating temperatures should be higher than 0°C.It is recommended that the operating temperature be below 70°C.The system consists of 2 logic blocks (LABs).If the maximal frequency is less than [0], it should be lower than that.Programmable logic types are divided into EE PLD.
EPM3032ATC44-7N Features
TQFP package
34 I/Os
44 pin count
44 pins
2 logic blocks (LABs)
EPM3032ATC44-7N Applications
There are a lot of Altera EPM3032ATC44-7N CPLDs applications.
- State machine control
- Address decoders
- DDC INTERFACE
- I/O expansion
- Code converters
- Pattern recognition
- Random logic replacement
- TIMERS/COUNTERS
- Digital systems
- USB Bus
