EPM3032ATI44-10N
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 44 |
| Published | 1998 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 44 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 227.3MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 44 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 34 |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 10 ns |
| Frequency (Max) | 227.3MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 600 |
| Number of Logic Blocks (LABs) | 2 |
| Speed Grade | 10 |
| Output Function | MACROCELL |
| Number of Macro Cells | 32 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height | 950μm |
| Length | 10mm |
| Width | 10mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
EPM3032ATI44-10N Overview
There are 32 macro cells, which are cells in a mobile phone network that provides radio coverage served by a high-power cell site (tower, antenna or mast).The product is contained in a TQFP package.It is equipped with 34I/O ports.Terminations of devices are set to [0].This electrical part has a terminal position of QUADand is connected to the ground.A voltage of 3.3V is used as the power supply for this device.It is a part of family [0].It is programmed with 44 pins.When using this device, YESis also available.There are 600 gates, which are devices that acts as a building block for digital circuits. In order to achieve high efficiency, the supply voltage should be maintained at [0].In this case, EEPROMwill be used to store the data.Surface Mountis used to mount this electronic component.It is designed with 44 pins.This device operates at a voltage of 3.6V when the maximum supply voltage is applied.The device is designed to operate with a minimal supply voltage of 3VV.This can be achieved at a frequency of 227.3MHz.Ideally, the operating temperature should be greater than -40°C.Ideally, the operating temperature should be below 85°C.There are 2 logic blocks (LABs) in its basic building block.The maximal frequency should be lower than 227.3MHz.This kind of FPGA is composed of EE PLD.
EPM3032ATI44-10N Features
TQFP package
34 I/Os
44 pin count
44 pins
2 logic blocks (LABs)
EPM3032ATI44-10N Applications
There are a lot of Altera EPM3032ATI44-10N CPLDs applications.
- Custom shift registers
- USB Bus
- D/T registers and latches
- Digital designs
- Boolean function generators
- Digital multiplexers
- PULSE WIDTH MODULATION (PWM)
- I/O PORTS (MCU MODULE)
- Bootloaders for FPGAs
- Custom state machines
