EPM3064ATC100-10N
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 100-TQFP |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Series | MAX® 3000A |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | compliant |
| Frequency | 222.2MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | EPM3064 |
| Qualification Status | Not Qualified |
| Power Supplies | 2.5/3.33.3V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.3V |
| Number of I/O | 66 |
| Propagation Delay | 4.5 ns |
| Number of Gates | 1250 |
| Speed Grade | 10 |
| Output Function | MACROCELL |
| Number of Macro Cells | 64 |
| JTAG BST | YES |
| Max Junction Temperature (Tj) | 90°C |
| Voltage Supply - Internal | 3V~3.6V |
| Delay Time tpd(1) Max | 10ns |
| Ambient Temperature Range High | 70°C |
| Number of Logic Elements/Blocks | 4 |
| Height | 1.2mm |
| RoHS Status | RoHS Compliant |
EPM3064ATC100-10N Overview
There are 64 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).It is contained in package [0].There are 66 I/Os on the board.100terminations are programmed into the device.This electrical part has a terminal position of QUADand is connected to the ground.The power source is powered by 3.3Vvolts.This part is included in Programmable Logic Devices.Trayshould be used for packaging the chip.To ensure reliability, the device operates at a temperature of [0].Mount the chip by Surface Mount.This type of FPGA is a part of the MAX? 3000A series.When using this device, YESis also available.The EPM3064can be used to identify its related parts.In digital circuits, there are 1250gates, which act as a basic building block.There is a maximum supply voltage of 3.6Vwhen the device is operating.With a minimal supply voltage of [0], it operates.4logic blocks/elements are present.It runs on 2.5/3.33.3Vvolts of power.This frequency can be achieved at 222.2MHz.
EPM3064ATC100-10N Features
100-TQFP package
66 I/Os
The operating temperature of 0°C~70°C TA
2.5/3.33.3V power supplies
EPM3064ATC100-10N Applications
There are a lot of Intel EPM3064ATC100-10N CPLDs applications.
- Software Configuration of Add-In Boards
- Synchronous or asynchronous mode
- USB Bus
- PULSE WIDTH MODULATION (PWM)
- Discrete logic functions
- Reset swapping
- Complex programmable logic devices
- Digital systems
- STANDARD SERIAL INTERFACE UART
- Battery operated portable devices
