EPM3064ATC100-4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 100 |
| Packaging | Bulk |
| Published | 1998 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 100 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 235 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 250MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 100 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 66 |
| Memory Type | EEPROM |
| Propagation Delay | 4.5 ns |
| Turn On Delay Time | 4.5 ns |
| Frequency (Max) | 222.2MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 1250 |
| Number of Programmable I/O | 66 |
| Number of Logic Blocks (LABs) | 4 |
| Output Function | MACROCELL |
| Number of Macro Cells | 64 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 1.27mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
EPM3064ATC100-4 Overview
There are 64 macro cells, which provide radio coverage via high-power cell towers, antennas or masts in a mobile phone network.The product is contained in a TQFP package.It is programmed with 66 I/Os.100terminations are programmed into the device.This electrical part has a terminal position of [0], which serves as an important point of access for passengers and freight.A voltage of 3.3Vprovides power to the device.It belongs to the family [0].It is recommended to package the chip by Bulk.In this chip, the 100pins are programmed.Additionally, this device is capable of displaying [0].A digital circuit can be constructed using 1250gates.In order to achieve high efficiency, the supply voltage should be maintained at [0].For data storage, EEPROMis adopted.It is mounted by Surface Mount.The device has a pinout of [0].This device operates at a voltage of 3.6Vas its maximum supply voltage.The device is designed to operate with a minimal supply voltage of 3VV.A programmable I/O count of 66 has been recorded.The frequency that can be achieved is 250MHz.Operating temperatures should be higher than 0°C.Temperatures should be lower than 70°C when operating.The program consists of 4 logic blocks (LABs).A maximum frequency of less than 222.2MHzis recommended.In programmable logic, a type of logic can be categorized as EE PLD.
EPM3064ATC100-4 Features
TQFP package
66 I/Os
100 pin count
100 pins
4 logic blocks (LABs)
EPM3064ATC100-4 Applications
There are a lot of Altera EPM3064ATC100-4 CPLDs applications.
- Interface bridging
- Wireless Infrastructure Base Band Unit and Remote Radio Unit
- Dedicated input registers
- I/O expansion
- Cross-Matrix Switch
- I2C BUS INTERFACE
- Synchronous or asynchronous mode
- Digital systems
- ANALOG-TO-DIGITAL CONVERTOR (ADC)
- PULSE WIDTH MODULATION (PWM)
