EPM3064ATC100-4N
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 100 |
| Published | 1998 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 100 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 222.2MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 100 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 66 |
| Memory Type | EEPROM |
| Propagation Delay | 4.5 ns |
| Turn On Delay Time | 4.5 ns |
| Frequency (Max) | 222.2MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 1250 |
| Number of Programmable I/O | 66 |
| Number of Logic Blocks (LABs) | 4 |
| Output Function | MACROCELL |
| Number of Macro Cells | 64 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 1.27mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
EPM3064ATC100-4N Overview
64macrocells exist, which are cells in a mobile phone network that are primarily composed of high-power towers, antennas, or masts.It is contained in package [0].As a result, it has 66 I/O ports programmed.There are 100 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.QUADis the terminal position of this electrical part.It is powered by a voltage of 3.3V volts.It belongs to the family [0].There are 100pins on the chip.When using this device, YEScan also be found.A digital circuit is built using 1250gates.If high efficiency is to be achieved, the supply voltage should be maintained at [0].For data storage, EEPROMis adopted.In this case, Surface Mountis used to mount the electronic component.The pins are [0].It operates at a maximum supply voltage of 3.6V volts.The minimal supply voltage is 3V.There are a total of 66 Programmable I/Os.This can be achieved at a frequency of 222.2MHz.Ideally, the operating temperature should be greater than 0°C.Temperatures should not exceed 70°C.In its simplest form, it consists of 4 logic blocks (LABs).If the maximal frequency is less than [0], it should be lower than that.A programmable logic type is categorized as EE PLD.
EPM3064ATC100-4N Features
TQFP package
66 I/Os
100 pin count
100 pins
4 logic blocks (LABs)
EPM3064ATC100-4N Applications
There are a lot of Altera EPM3064ATC100-4N CPLDs applications.
- Reset swapping
- Parity generators
- Interface bridging
- Custom state machines
- Wide Vin Industrial low power SMPS
- DMA control
- State machine design
- ROM patching
- Page register
- Multiple DIP Switch Replacement
