EPM3064ATC100-7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 100 |
| Packaging | Bulk |
| Published | 1998 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 100 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 235 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 166.67MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 100 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 66 |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Turn On Delay Time | 7.5 ns |
| Frequency (Max) | 222.2MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 1250 |
| Number of Programmable I/O | 66 |
| Number of Logic Blocks (LABs) | 4 |
| Speed Grade | 7 |
| Output Function | MACROCELL |
| Number of Macro Cells | 64 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
EPM3064ATC100-7 Overview
Currently, there are 64 macro cells, which are low-power cell sites (towers, antennas, masts) that serve as radio coverage.A TQFP package contains the item.There are 66 I/Os programmed in it.The termination of a device is set to [0].This electrical part has a terminal position of QUADand is connected to the ground.It is powered from a supply voltage of 3.3V.This part is included in Programmable Logic Devices.Bulkshould be used to package the chip.100pins are programmed on the chip.It is also possible to find YESwhen using this device.The 1250gates serve as building blocks for digital circuits.High efficiency requires the supply voltage to be maintained at [0].It is adopted to store data in [0].This electronic part is mounted in the way of Surface Mount.The device has a pinout of [0].There is a maximum supply voltage of 3.6V.With a minimal supply voltage of [0], it operates.Programmable I/Os are counted up 66.This frequency is 166.67MHz.In order to operate, the temperature should be higher than 0°C.A temperature below 70°Cshould be used as the operating temperature.Its basic building block is composed of 4 logic blocks (LABs).It is recommended that the maximal frequency be lower than 222.2MHz.Types of programmable logic are divided into EE PLD.
EPM3064ATC100-7 Features
TQFP package
66 I/Os
100 pin count
100 pins
4 logic blocks (LABs)
EPM3064ATC100-7 Applications
There are a lot of Altera EPM3064ATC100-7 CPLDs applications.
- Timing control
- DMA control
- Programmable power management
- Multiple Clock Source Selection
- State machine design
- Software Configuration of Add-In Boards
- USB Bus
- Configurable Addressing of I/O Boards
- Power automation
- SUPERVISORY FUNCTION (LVD AND WATCHDOG)
