EPM3064ATC44-7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 44 |
| Packaging | Bulk |
| Published | 1998 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 235 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 166.67MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 44 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 34 |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Turn On Delay Time | 7.5 ns |
| Frequency (Max) | 222.2MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 1250 |
| Number of Programmable I/O | 34 |
| Number of Logic Blocks (LABs) | 4 |
| Speed Grade | 7 |
| Output Function | MACROCELL |
| Number of Macro Cells | 64 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Length | 10mm |
| Width | 10mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
EPM3064ATC44-7 Overview
This network has 64macro cells, which are cells that provide radio coverage provided by a high-power cell site (tower, antenna, mast).It is contained in package [0].It is equipped with 34I/O ports.44terminations are programmed into the device.The terminal position of this electrical part is QUAD, which serves as an important access point for passengers or freight.A voltage of 3.3V is used as the power supply for this device.There is a part included in Programmable Logic Devices.Bulkis the packaging method.There are 44 pins on the chip.If you use this device, you will also find [0].As a building block for digital circuits, there are 1250gates.If high efficiency is to be achieved, the supply voltage should be maintained at [0].In this case, EEPROMwill be used to store the data.In this case, Surface Mountis used to mount the electronic component.The device has a pinout of [0].A maximum voltage of 3.6Vis required for operation.A minimum supply voltage of 3V is required for it to operate.Programmable I/Os are counted up 34.It is possible to achieve a frequency of 166.67MHz.It is recommended that the operating temperature be higher than 0°C.There should be a temperature below 70°Cat the time of operation.The program consists of 4 logic blocks (LABs).If the maximal frequency is less than [0], it should be lower than that.Types of programmable logic are divided into EE PLD.
EPM3064ATC44-7 Features
TQFP package
34 I/Os
44 pin count
44 pins
4 logic blocks (LABs)
EPM3064ATC44-7 Applications
There are a lot of Altera EPM3064ATC44-7 CPLDs applications.
- ANALOG-TO-DIGITAL CONVERTOR (ADC)
- Cross-Matrix Switch
- Address decoders
- Software-driven hardware configuration
- SUPERVISORY FUNCTION (LVD AND WATCHDOG)
- POWER-SAVING MODES
- Pattern recognition
- SFP, QSFP, QSFP-DD, OSFP, Mini-SAS HD Port Management
- I/O PORTS (MCU MODULE)
- State machine control
