EPM3064ATI100-10
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 100-TQFP |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Series | MAX® 3000A |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 235 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | EPM3064 |
| JESD-30 Code | S-PQFP-G100 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 2.5/3.33.3V |
| Supply Voltage-Min (Vsup) | 3V |
| Programmable Type | In System Programmable |
| Number of I/O | 66 |
| Clock Frequency | 100MHz |
| Propagation Delay | 10 ns |
| Number of Gates | 1250 |
| Output Function | MACROCELL |
| Number of Macro Cells | 64 |
| JTAG BST | YES |
| Voltage Supply - Internal | 3V~3.6V |
| Delay Time tpd(1) Max | 10ns |
| Number of Logic Elements/Blocks | 4 |
| Height Seated (Max) | 1.27mm |
| RoHS Status | Non-RoHS Compliant |
EPM3064ATI100-10 Overview
This network has 64macro cells, which are cells that provide radio coverage provided by a high-power cell site (tower, antenna, mast).The product is contained in a 100-TQFP package.It is programmed with 66 I/Os.Terminations of devices are set to [0].QUADis the terminal position of this electrical part.It is powered by a voltage of 3.3V volts.There is a part in the family [0].Trayshould be used to package the chip.To ensure its reliability, the operating temperature is set to [0].It is recommended to mount the chip by Surface Mount.It belongs to the MAX? 3000Aseries of FPGAs.This device also displays [0].In accordance with the [0], its related parts are listed.There are 1250 gates, which are devices that acts as a building block for digital circuits. A total of 4logic elements/blocks are present.The system runs on a power supply of 2.5/3.33.3V watts.In this case, the maximum supply voltage (Vsup) reaches 3.6V.It is recommended that the supply voltage (Vsup) be greater than 3V.The clock frequency of this device should not exceed 100MHz.
EPM3064ATI100-10 Features
100-TQFP package
66 I/Os
The operating temperature of -40°C~85°C TA
2.5/3.33.3V power supplies
EPM3064ATI100-10 Applications
There are a lot of Intel EPM3064ATI100-10 CPLDs applications.
- Programmable power management
- Power Meter SMPS
- Multiple DIP Switch Replacement
- SUPERVISORY FUNCTION (LVD AND WATCHDOG)
- Code converters
- State machine design
- Configurable Addressing of I/O Boards
- Multiple Clock Source Selection
- Programmable polarity
- Software-driven hardware configuration
