EPM3128ATC100-10
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 100 |
| Packaging | Bulk |
| Published | 1998 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 100 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 235 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 125MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 100 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 80 |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 10 ns |
| Frequency (Max) | 192.3MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 2500 |
| Number of Programmable I/O | 80 |
| Number of Logic Blocks (LABs) | 8 |
| Speed Grade | 10 |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 1.27mm |
| Length | 14mm |
| Width | 14mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
EPM3128ATC100-10 Overview
The mobile phone network has 128 macro cells, which are cells that provide radio coverage from high-power cell sites (towers, antennas, or masts).There is a TQFP package containing it.It is programmed with 80 I/Os.There is a 100terminations set on devices.This electrical part is wired with a terminal position of QUAD.A voltage of 3.3V is used as the power supply for this device.It belongs to the family [0].It is packaged in the way of Bulk.There are 100pins on the chip.This device is also capable of displaying [0].The 2500gates serve as building blocks for digital circuits.A high level of efficiency can be achieved by maintaining the supply voltage at [0].It is recommended to store data in [0].Surface Mountmounts this electronic component.There are 100 pins embedded in the device.It operates with the maximal supply voltage of 3.6V.Initially, it requires a voltage of 3Vas the minimum supply voltage.In total, there are 80programmable I/Os.There is 125MHz frequency that can be achieved.The operating temperature should be higher than 0°C.A temperature lower than 70°Cis recommended for operation.It consists of 8 logic blocks (LABs).There should be a lower maximum frequency than 192.3MHz.Programmable logic types can be divided into EE PLD.
EPM3128ATC100-10 Features
TQFP package
80 I/Os
100 pin count
100 pins
8 logic blocks (LABs)
EPM3128ATC100-10 Applications
There are a lot of Altera EPM3128ATC100-10 CPLDs applications.
- Code converters
- I2C BUS INTERFACE
- Custom state machines
- ROM patching
- Page register
- Cross-Matrix Switch
- Bootloaders for FPGAs
- Power up sequencing
- Multiple DIP Switch Replacement
- Portable digital devices
