EPM3128ATC100-10N
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 100 |
| Weight | 657.000198mg |
| Published | 1998 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 100 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 192.3MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 100 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 80 |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 10 ns |
| Frequency (Max) | 192.3MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 2500 |
| Number of Logic Blocks (LABs) | 8 |
| Speed Grade | 10 |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height | 1mm |
| Length | 14mm |
| Width | 14mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
EPM3128ATC100-10N Overview
A mobile phone network consists of 128macro cells, which are radio coverage cells served by a high-power cell site (tower, antenna or mast).You can find it in package [0].As a result, it has 80 I/O ports programmed.There are 100 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The terminal position of this electrical part is QUAD, which serves as an important access point for passengers or freight.An electrical supply voltage of 3.3V is used to power it.This part is in the family [0].Chips are programmed with 100 pins.It is also possible to find YESwhen using this device.The 2500gates serve as building blocks for digital circuits.For high efficiency, the supply voltage should be maintained at [0].Data storage is performed using [0].It is mounted by Surface Mount.There are 100 pins embedded in the device.A maximum supply voltage of 3.6Vis used in its operation.Initially, it requires a voltage of 3Vas the minimum supply voltage.There can be 192.3MHz frequency achieved.It is recommended that the operating temperature exceeds 0°C.The operating temperature should be lower than 70°C.In total, it contains 8 logic blocks (LABs).The maximal frequency should be lower than 192.3MHz.Types of programmable logic are divided into EE PLD.
EPM3128ATC100-10N Features
TQFP package
80 I/Os
100 pin count
100 pins
8 logic blocks (LABs)
EPM3128ATC100-10N Applications
There are a lot of Altera EPM3128ATC100-10N CPLDs applications.
- Custom state machines
- Page register
- Digital systems
- DDC INTERFACE
- Code converters
- PULSE WIDTH MODULATION (PWM)
- Cross-Matrix Switch
- Preset swapping
- Custom shift registers
- Digital multiplexers
