EPM3128ATC100-5
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 100 |
| Packaging | Bulk |
| Published | 1998 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 100 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 235 |
| Supply Voltage | 3.3V |
| Frequency | 250MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 100 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 80 |
| Memory Type | EEPROM |
| Propagation Delay | 5 ns |
| Turn On Delay Time | 5 ns |
| Frequency (Max) | 192.3MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 2500 |
| Number of Programmable I/O | 80 |
| Number of Logic Blocks (LABs) | 8 |
| Speed Grade | 5 |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 1.27mm |
| Length | 14mm |
| Width | 14mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
EPM3128ATC100-5 Overview
There are 128 macro cells, which provide radio coverage via high-power cell towers, antennas or masts in a mobile phone network.The item is enclosed in a TQFP package.As you can see, this device has 80 I/O ports programmed into it.Devices are programmed with terminations of [0].QUADis the terminal position of this electrical part.The device is powered by a voltage of 3.3V volts.The part is included in Programmable Logic Devices.It is recommended to package the chip by Bulk.It is equipped with 100 pin count.Additionally, this device is capable of displaying [0].2500gates are devices that serve as building blocks for digital circuits.It is recommended that the supply voltage be kept at 3.3Vto maximize efficiency.For storing data, it is recommended to use [0].It is mounted by Surface Mount.The 100pins are designed into the board.There is a maximum supply voltage of 3.6V.It operates with the minimal supply voltage of 3V.A total of 80programmable I/Os are available.There is 250MHz frequency that can be achieved.In order to operate, the temperature should be higher than 0°C.Temperatures should not exceed 70°C.The logic block consists of 8 l logic blocks (LABs).The maximal frequency should be lower than 192.3MHz.Types of programmable logic are divided into EE PLD.
EPM3128ATC100-5 Features
TQFP package
80 I/Os
100 pin count
100 pins
8 logic blocks (LABs)
EPM3128ATC100-5 Applications
There are a lot of Altera EPM3128ATC100-5 CPLDs applications.
- D/T registers and latches
- Wireless Infrastructure Base Band Unit and Remote Radio Unit
- PLC analog input modules
- DMA control
- Field programmable gate
- State machine design
- Wide Vin Industrial low power SMPS
- ON-CHIP OSCILLATOR CIRCUIT
- INTERRUPT SYSTEM
- I/O PORTS (MCU MODULE)
