EPM3128ATC100-5N
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 100-TQFP |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Published | 1998 |
| Series | MAX® 3000A |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | compliant |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | EPM3128 |
| JESD-30 Code | S-PQFP-G100 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 2.5/3.33.3V |
| Supply Voltage-Min (Vsup) | 3V |
| Programmable Type | In System Programmable |
| Number of I/O | 80 |
| Clock Frequency | 192.3MHz |
| Propagation Delay | 5 ns |
| Number of Gates | 2500 |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | YES |
| Voltage Supply - Internal | 3V~3.6V |
| Delay Time tpd(1) Max | 5ns |
| Number of Logic Elements/Blocks | 8 |
| Height Seated (Max) | 1.27mm |
| Length | 14mm |
| Width | 14mm |
| RoHS Status | RoHS Compliant |
EPM3128ATC100-5N Overview
This network has 128macro cells, which are cells that provide radio coverage provided by a high-power cell site (tower, antenna, mast).The item is packaged with 100-TQFP.There are 80 I/Os programmed in it.The termination of a device is set to [0].This electrical part is wired with a terminal position of QUAD.A voltage of 3.3V is used as the power supply for this device.This part is part of the family [0].Trayshould be used to package the chip.To ensure its reliability, the operating temperature is set to [0].Ensure that the chip is mounted by Surface Mount.The MAX? 3000Aseries FPGA is one of these types.If this device is used, you will also be able to find [0].The EPM3128can be used to identify its related parts.A digital circuit is built using 2500gates.8logic blocks/elements are present.In order for the device to operate, it requires 2.5/3.33.3V power supplies.Vsup reaches 3.6Vas the maximum supply voltage.There should be a higher supply voltage (Vsup) than 3V.Ideally, its clock frequency should not exceed 192.3MHz.
EPM3128ATC100-5N Features
100-TQFP package
80 I/Os
The operating temperature of 0°C~70°C TA
2.5/3.33.3V power supplies
EPM3128ATC100-5N Applications
There are a lot of Intel EPM3128ATC100-5N CPLDs applications.
- Boolean function generators
- State machine design
- Handheld digital devices
- Reset swapping
- Cross-Matrix Switch
- SFP, QSFP, QSFP-DD, OSFP, Mini-SAS HD Port Management
- SUPERVISORY FUNCTION (LVD AND WATCHDOG)
- Software-Driven Hardware Configuration
- Battery operated portable devices
- Software-driven hardware configuration
