banner_page

EPM3128ATC100-7N

0.5mm PMIC 100 Pin 192.3MHz 3.3V TQFP


  • Manufacturer: Altera
  • Nocochips NO: 2936-EPM3128ATC100-7N
  • Package: TQFP
  • Datasheet: PDF
  • Stock: 772
  • Description: 0.5mm PMIC 100 Pin 192.3MHz 3.3V TQFP (Kg)

Details

Tags

Parameters
Max Operating Temperature 70°C
Min Operating Temperature 0°C
Additional Feature YES
Subcategory Programmable Logic Devices
Technology CMOS
Terminal Position QUAD
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Supply Voltage 3.3V
Terminal Pitch 0.5mm
Frequency 192.3MHz
Time@Peak Reflow Temperature-Max (s) 40
Pin Count 100
Operating Supply Voltage 3.3V
Temperature Grade COMMERCIAL
Max Supply Voltage 3.6V
Min Supply Voltage 3V
Number of I/O 80
Memory Type EEPROM
Propagation Delay 7.5 ns
Turn On Delay Time 7.5 ns
Frequency (Max) 192.3MHz
Programmable Logic Type EE PLD
Number of Gates 2500
Number of Logic Blocks (LABs) 8
Speed Grade 7
Output Function MACROCELL
Number of Macro Cells 128
JTAG BST YES
Max Junction Temperature (Tj) 90°C
Ambient Temperature Range High 85°C
In-System Programmable YES
Height 1.2mm
Length 14mm
Width 14mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status RoHS Compliant
Lead Free Lead Free
Factory Lead Time 1 Week
Mount Surface Mount
Package / Case TQFP
Number of Pins 100
Weight 657.000198mg
Published 1998
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 3
Number of Terminations 100
Termination SMD/SMT
ECCN Code EAR99
Terminal Finish Matte Tin (Sn) - annealed

EPM3128ATC100-7N Overview


There are 128 macro cells in the network, which are high-power cell sites that provide radio coverage (tower, antenna, or mast) for a mobile phone network.It is embedded in the TQFP package.As you can see, this device has 80 I/O ports programmed into it.The device is programmed with 100 terminations.The terminal position of this electrical component is QUAD.It is powered from a supply voltage of 3.3V.It is a part of the family [0].It is equipped with 100 pin count.This device can also display [0].For digital circuits, there are 2500gates. These devices serve as building blocks.If high efficiency is to be achieved, the supply voltage should be maintained at [0].In this case, EEPROMwill be used to store the data.It is mounted by Surface Mount.It is designed with 100 pins.It operates at a maximum supply voltage of 3.6V volts.Initially, it requires a voltage of 3Vas the minimum supply voltage.This can be achieved at a frequency of 192.3MHz.In order to operate properly, the operating temperature should be higher than 0°C.There should be a temperature below 70°Cat the time of operation.It is composed of 8 logic blocks (LABs).It is recommended that the maximal frequency be lower than 192.3MHz.A programmable logic type is categorized as EE PLD.

EPM3128ATC100-7N Features


TQFP package
80 I/Os
100 pin count
100 pins
8 logic blocks (LABs)

EPM3128ATC100-7N Applications


There are a lot of Altera EPM3128ATC100-7N CPLDs applications.

  • Digital systems
  • Wireless Infrastructure Base Band Unit and Remote Radio Unit
  • Timing control
  • PULSE WIDTH MODULATION (PWM)
  • Power up sequencing
  • Address decoding
  • Power Meter SMPS
  • STANDARD SERIAL INTERFACE UART
  • Multiple Clock Source Selection
  • Handheld digital devices

Write a review

Note: HTML is not translated!
    Bad           Good